Trade Discount 25%
PIR Passage Motion Sensor 360 Degree MajorTech
MajorTech PIR motion sensor features 360 degree detection for passages. Ideal for automatic lighting in hallways and walkways.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: 360° Passage PIR Sensor, Infrared Motion Sensor, Hallway Motion Sensor, Corridor Occupancy Sensor
Technical Specifications
- Model: PIR45
- Detection Area: 360°
- Detection Distance: 4 m × 20 m maximum
- Detection Motion Speed: 0.6–1.5 m/s
- Supply Voltage: 220–240 V AC
- Power Frequency: 50/60 Hz
- Ambient Light Setting: Less than 3–2000 Lux, adjustable
- Time Delay: 10 seconds to 30 minutes, adjustable
- Rated Load: 2000 W incandescent lamps; 1000 W LED/CFL
- Installation Height: 4–10 m
- Installation Type: Ceiling surface mount
- Ingress Protection: IP20, indoor installation
- Power Consumption: 0.5 W
- Operating Temperature: -20°C to 40°C
- Dimensions (H x L x W): 111mm x 110mm x 75mm
- Weight: 0.183 kg
Key Features
- 360° detection coverage for long passages, hallways and walkways
- Detection range of up to 20 m in length and 4 m in width
- Automatically switches connected lighting or electrical devices when motion and body heat are detected
- Adjustable ambient-light threshold for day/night operation
- Adjustable time-delay switching from 10 seconds to 30 minutes
- Suitable for integration into new or existing lighting systems
- Designed for indoor use with an IP20 rating
Professional Installation Requirements
- Must be installed by a licensed or suitably qualified electrician. Isolate the electrical supply before installation and complete wiring in accordance with AS/NZS 3000 and the manufacturer's instructions.
Applications
- Automatic lighting control in passages and corridors
- Hallways, walkways and lobbies
- Commercial offices, hotels and public buildings
- Indoor bathrooms and circulation areas
- Energy-conscious control of LED, CFL and incandescent lighting
Standards & Compliance
- Manufacturer specifies AS/NZS 60669.1 for switches for household and similar fixed electrical installations
- Manufacturer specifies AS 60669.2.1 for electronic switches
- Installation should comply with AS/NZS 3000:2018 Electrical installations
Environmental Benefits
- Reduces unnecessary lighting runtime by switching lights on only when movement is detected
- Adjustable Lux threshold can prevent activation when sufficient daylight is available
- Suitable for LED lighting loads up to 1000 W, supporting lower-energy lighting systems
- Low sensor power consumption of approximately 0.5 W
- Longer lamp service life may be supported by reducing unnecessary operating hours
Warranty Information
MajorTech lists sensors under its extended 5-year warranty category, subject to the manufacturer's warranty terms, correct installation, proper use and proof of purchase.
Available Now
Available through MajorTech and authorised Australian electrical and lighting distributors.
