SCHNAP Logo

Making Trade Life Easy!

Switches & Mechs

2521 - 2555 out of 5092 result found
Sort by Position: Low to High
Trade Discount 20%
Switch 10A Premiere Polycarbonate IP20 Black Hager
WBP4XS
$134.10 $107.60
Hager switch features 10A, IP20, Premiere series. Suited for AU trade and residential electrical installations.
+ −
Trade Discount 20%
Allen-Bradley E300 Sensing Module Current and Ground Fault 10 to 100A for use with 100C 60 and 97A
E300 Sensing Module 10-100A Current Ground Fault Modular Design Allen-Bradley
193ESMIG100AC97
$963.40 $773.10
Allen-Bradley product features the specifications listed. Category needs reassignment outside Switches & Mechs see reasoning column.
+ −
Trade Discount 20%
Allen-Bradley 194E Enclosed Disconnect Switch IP66 Stainless Steel, Actuator Black/Grey, 3 Pole 40A
Enclosed Disconnect Switch 3 Pole 40A IP66 Stainless Steel Black Grey Actuator NHP
194ECA40
$1,926.80 $1,546.20
The enclosed disconnect switch features a 3 pole design with a 40 A rated permanent current and IP66 protection for industrial and commercial electrical isolation. It supports a maximum rated operational voltage of 600 V, with 690 V rated insulation voltage and 8 kV rated impulse withstand voltage. Stainless steel construction, NEMA Rating 4X and dimensions of 191mm x 187mm x 126mm support demanding installation environments. Review the full technical specifications and installation requirements below before ordering.
+ −
Trade Discount 20%
Allen-Bradley 194E Auxiliary Contact 1 N.O + 1 N.C LB for 194EE Front/Door mount 16 - 100A
Auxiliary Contact 1 N.O and N.C 690V 12A (Front Door Mount) NHP
194EEPL11
$62.90 $50.50
Designed for industrial control applications with 1 N.O and 1 N.C contacts and screw connection. Rated insulation voltage is 690V with a rated operation current of 12A. The auxiliary contact measures 100mm x 80mm x 50mm and weighs 0.5 kg, with relevant Australian standards compliance stated on the product page. Review the full specifications and installation requirements below before ordering.
+ −
Trade Discount 20%
Allen-Bradley 194L Handle Type A 48 x 48mm Grey Black 45 Degrees 1 0 2
Cam Switch Faceplate 48x48mm IP66 Rated Grey Black (Grey Black) NHP
194LHC4A325
$20.20 $16.20
48x48mm cam switch faceplate with IP66 protection for industrial power circuit breakers and switch disconnectors. Screw mounting with dimensions of 48mm x 22.5mm x 48mm and a weight of 0.5 kg. The faceplate includes a cam switch faceplate with knob for easy operation and complies with relevant Australian standards for electrical safety. See the product details below for applications, installation requirements, and warranty information.
+ −
Trade Discount 20%
Allen-Bradley 194R Terminal Shroud for UL Non Fused Switches 3Pole 800 to 1200A
Terminal Shroud for UL Non Fused Switches 3Pole 800-1200A Shock Protection NHP
194RLNC25
$182.20 $146.20
Terminal shroud with shock protection for UL non-fused switches, 3Pole 800-1200A—ideal for industrial and commercial electrical installations.
+ −
Trade Discount 20%
Allen-Bradley 194R Extension Shaft 580mm Suits 194R HM Handles 100 400A
Extension Shaft for Fuse Switches 580mm Length Suits 194R HM Handles NHP
194RR8
$105.90 $85.00
The Extension Shaft for Fuse Switches 580mm is designed for compatibility with Allen-Bradley 194R HM handles in industrial fuse switch applications. It has a 580 mm length and is classified as a switch operating shaft. The shaft measures 30 mm x 580 mm x 30 mm and is designed to support reliable fuse switch operation. See the specifications and application details below before ordering.
+ −
Trade Discount 20%
Austrol N100 EPDM Cover Green for NTOC 30.5mm Guarded Operator
EPDM Protective Cover for NTOC 30.5mm Guarded Operator Green Round Design NHP
1X17EPDM
$45.90 $36.80
The NHP 1X17EPDM is an EPDM protective cover for NTOC 30.5mm guarded operators, featuring a Green colour and round design. Made from durable ethylene-propylene diene monomer rubber (EPDM), it provides long-lasting protection and operates across a temperature range of -30 to 80°C. With dimensions of 30.5mm × 30.5mm × 30.5mm and a weight of 0.2kg, it is suitable for command devices and operators in industrial machinery and equipment requiring protective covers. The product complies with AS/NZS 3000 for electrical installations.
+ −
Trade Discount 20%
Allen-Bradley PowerFlex 755 VSD 400V IP20 ND 3.9A 3HP or HD 2.7A 2HP Frame 3
PowerFlex 755 VSD 400V 3.9A 3HP ND IP20 Frame 3 Allen-Bradley
20G11NE3P9AA0NNNNN
$7,105.20 $5,701.70
Allen-Bradley product features the specifications listed. Category needs reassignment outside Switches & Mechs see reasoning column.
+ −
Trade Discount 20%
Allen-Bradley PowerFlex 755 VSD 690V IP54 ND 500A 500kW or HD 413A 400kW No Brake Frame 8
PowerFlex 755 VSD 690V 500kW IP54 Frame 8 Allen-Bradley
20G1AJF500JN0NNNNN
$232,140.00 $186,285.00
Allen-Bradley product features the specifications listed. Category needs reassignment outside Switches & Mechs see reasoning column.
+ −
Trade Discount 20%
Socomec SLB Auxiliary Contact, 1 N.O + 1 N.C, suits 1st Position 125 - 3200A
Auxiliary Contact 1 N.O and N.C 125-3200A Front Fastening NHP
26990141
$218.10 $175.00
Designed with 1 Normally Open (N.O) and 1 Normally Closed (N.C) contact for electrical control systems. Features a flat plug-in connection and front fastening mounting method for installation. Rated operation current includes 16 A at AC-15, 3 A at AC-15 400 V, 16 A at DC-13 24 V, 5 A at DC-13 24 V and 6 A at AC-15 230 V. See the full specifications below for current ratings, dimensions and installation requirements.
+ −
Trade Discount 20%
Socomec SLB Coupling - 6/8P Load Break Switch, suits 3/4P 315 - 630A
Load Break Switch Coupling 6 8P 315-630A Connectivity NHP
26999290
$2,204.40 $1,769.00
Load break switch coupling with 6 8P design and 315-630A compatibility—ideal for industrial and commercial power distribution.
+ −
Trade Discount 20%
Socomec SLB Linkage Kit for 200 to 250A and 8Pole
SLB Linkage Kit for 200-250A 8 Pole Design NHP
26999230
$1,489.90 $1,195.60
SLB linkage kit with 200-250A capacity and 8 pole design—ideal for low-voltage switch technology applications.
+ −
Trade Discount 20%
Socomec 32BR Auxiliary contact, 1 C.O, suits 125 - 1250A 1st Position
Auxiliary Contact 1 C.O 125-1250A NHP
27990011
$135.50 $108.80
Designed with 1 C.O change over contact for use in various electrical control systems. Rated operation current (Ie) at AC-16 is 16 A and at DC-13, 24 V is 16 A. Dimensions are 100mm x 50mm x 50mm, with a weight of 0.5 kg and compliance with relevant Australian standards for electrical components. See the product details below for technical specifications, applications and installation requirements.
+ −
Trade Discount 20%
Socomec VLB Terminal Screen, suits 3P 630 - 800A (QTY 1)
VLB Terminal Screen for 3P 630-800A Phase Separation Socomec Compatible NHP
29983080
$218.10 $175.00
VLB terminal screen designed for 3-pole configurations, compatible with Socomec VLB series—ideal for industrial and commercial power distribution systems.
+ −
Trade Discount 20%
Socomec 32BR Auxiliary Contact, 2 C.O suits 125 - 1250A 2nd Position
Auxiliary Contact 2 C.O 125-1250A 2nd Position NHP
29990012
$135.50 $108.80
Designed for 125-1250A applications, this auxiliary contact includes 2 change-over contacts for various electrical control systems. The product measures 50mm x 100mm x 100mm and weighs 0.5 kg. Its standard design is stated as compatible with various systems, with compliance with relevant Australian standards for electrical components. Review the product specifications and installation requirements below before ordering.
+ −
Trade Discount 20%
Socomec 32BR Load Break Switch kit w/ External Side Op. Handle, 3P 400A
Load Break Switch Kit 3P 400A External Side Handle 220kW Power NHP
32BR3040
$2,375.20 $1,906.00
Load break switch kit with 3-pole design and 400A rated current—ideal for industrial and commercial power distribution.
+ −
Trade Discount 20%
Socomec ATyS/BCO/SCO Bridging Bar 1P, 125 - 200A (QTY 1)
Switch 200A Grey NHP
41090019
$132.30 $106.20
NHP switch features 200A. Suited for AU trade and residential electrical installations.
+ −
Trade Discount 20%
Allen-Bradley 440K Actuator 90 Degree for Elf Cadet3
Actuator 90 Degree for Elf Cadet3 Construction 30mm x 100mm 50mm NHP
440KA21006
$27.10 $21.80
Actuator 90 Degree for Elf Cadet3 is designed for industrial safety interlock applications. Its robust construction supports use with the 440K Cadet 3 series. Dimensions are 30mm x 100mm x 50mm with a weight of 0.5 kg. Review the product details below for installation requirements and application information.
+ −
Trade Discount 20%
Allen-Bradley 440K Alignment Guide with Semi-Flexible Actuator for Elf Cadet3
Alignment Guide with Semi-Flexible Actuator 440K Cadet 3 Compatible Design NHP
440KA21030
$77.80 $62.40
The Alignment Guide with Semi-Flexible Actuator is designed for versatile alignment in industrial and commercial machine safety applications. Its semi-flexible actuator supports alignment requirements in compatible 440K Cadet 3 designs. The NHP 440KA21030 provides a dedicated machine safety accessory option for relevant installations. See the product information below for further application details.
+ −
Trade Discount 20%
Allen-Bradley 440N Ferrogard Replacement Actuator Forerrogard GD2
Ferrogard Replacement Actuator Non-Contact Design Safety NHP
440NA02128
$262.90 $210.90
Ferrogard replacement actuator with non-contact design and enhanced safety—ideal for industrial machinery safety interlocks.
+ −
Trade Discount 20%
Allen-Bradley 440N SensaGuard 18mm Plastic Actuator Series A Standard Coded Models
SensaGuard 18mm Plastic Actuator Non-Contact Interlock Series A NHP
440NZ18PT
$162.40 $130.30
SensaGuard actuator with 18mm diameter and non-contact interlock—ideal for industrial machine safety.
+ −
Trade Discount 20%
NHP Cable Pull Wire Switch Hook And Eye Turnbuckle 10mm Stainless Steel
Stainless Steel Turnbuckle 10mm Hook Eye Design NHP
55164SS
$89.00 $71.40
Stainless steel turnbuckle with 10mm dimensions and hook & eye design—ideal for industrial emergency stop pull cord systems.
+ −
Trade Discount 19%
Sprecher and Schuh D7 Legend Plate 30 x 50 mm Snap in Black with White Text FAULT
Legend Plate 30x50 mm Snap-In Black with White Text 'FAULT' Plastic NHP
D718BE113
$9.80 $7.90
Legend plate with snap-in design and 'FAULT' in white text—ideal for industrial and commercial control panels.
+ −
Trade Discount 19%
Sprecher and Schuh D7 Legend Plate 30 x 50 mm Snap in Black with White Text ON
Legend Plate 30x50mm Snap-in White Text 'ON' Plastic NHP
D718BE166
$9.80 $7.90
Legend plate with 30x50mm dimensions and snap-in design—ideal for control panels and machinery. Built for industrial and commercial use
+ −
Trade Discount 20%
Sprecher and Schuh D7 Legend Plate 30 x 50 mm BLANK White Plastic
Blank Legend Plate 30x50mm White Plastic 22.5mm Device Compatible NHP
D735WE100
$8.20 $6.60
Designed for 22.5mm operator control devices in industrial control panels and commercial electrical installations. Made from white plastic with dimensions of 50mm x 1mm x 30mm and a weight of 0.1 kg. Complies with AS/NZS 3000 for electrical installations. Review the specifications and installation requirements below before ordering.
+ −
Trade Discount 20%
Socomec ISO Enclosed Isolator, IP 65 Aluminium Grey, Handle - Blue, 3P 100A
ISO Enclosed Isolator 3P 100A IP65 Aluminium Grey Blue Handle NHP
ISO3100MGS
$765.30 $614.10
ISO enclosed isolator with 3 poles and 100A rating—ideal for industrial and commercial electrical applications.
+ −
Trade Discount 20%
NHP ISO Switched Socket Outlet, 3 Flat Pins 10A 250V AC, w/ Base, RO
Weatherproof Switch 10A IP66 250V Polycarbonate White NHP
ISOC310PRO
$71.90 $57.70
NHP weatherproof switch features 10A, IP66, 250V. Suited for AU trade and residential electrical installations.
+ −
Trade Discount 20%
Allen-Bradley 194L Cam Switch 1Pole 16A Base Mount 90 Degree Off On
Cam Switch 1 Pole 16A Base Mount 90° Off-On DIN Rail NHP
194LA161751
$59.80 $48.00
NHP Cam Switch 1 Pole 16A Base Mount 90° Off-On DIN Rail — suited for control-circuit switching and selection.
+ −
Trade Discount 20%
Allen-Bradley 194L Cam Switch 3Pole 25A Base Mount 90 Degree Off On
Switch Mech 3P 25A Allen-Bradley
194LA251753
$121.20 $97.30
Allen-Bradley switch mech featuring 3P and 25A. Ideal for industrial control panels and machine operator stations.
+ −
Trade Discount 20%
Allen-Bradley 194L Cam Switch 4Pole 25A Base Mount 90 Degree Off On
Cam Switch 4P 25A Base Mount 90° Off On Allen-Bradley
194LA251754
$135.10 $108.40
Allen-Bradley cam switch featuring 4P and 25A. Ideal for industrial control panels and machine operator stations.
+ −
Trade Discount 20%
Allen-Bradley 194L Cam Switch 3Pole 12A Panel Mount 60 Degree Step 1 2 3
Cam Switch 3P 12A Panel Mount 60° Step Allen-Bradley
194LE124503
$151.20 $121.30
Allen-Bradley cam switch featuring 3P, 12A and panel mount. Ideal for industrial control panels and machine operator stations.
+ −
Trade Discount 20%
Allen-Bradley 194L Cam Switch 1Pole 12A Panel Mount 45 Degree Voltmeter TR ST O RN SN TN
Cam Switch 1P 12A Panel Mount 45° Voltmeter IP20 Allen-Bradley
194LE128251
$106.60 $85.50
Allen-Bradley cam switch featuring 1P, 12A, IP20 and panel mount. Ideal for industrial control panels and machine operator stations.
+ −
Trade Discount 20%
Allen-Bradley 194L Cam Switch 1Pole 12A Panel Mount 45 Degree Voltmeter 0 RS ST TR
Cam Switch 1P 12A Panel Mount 45° Voltmeter IP20 Allen-Bradley
194LE128271
$80.10 $64.30
Allen-Bradley cam switch featuring 1P, 12A, IP20 and panel mount. Ideal for industrial control panels and machine operator stations.
+ −
Trade Discount 20%
Allen-Bradley 194L Cam Switch 2Pole 20A Panel Mount 90 Degree Off On
Cam Switch 2-Pole 20A Panel Mount 90° Off-On Front Mounting NHP
194LE201752
$70.90 $56.90
NHP Cam Switch 2-Pole 20A Panel Mount 90° Off-On Front Mounting — suited for control-circuit switching and selection.
+ −
58 - 72  Prev
66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
Next  74 - 88

-