Trade Discount 17%
1200mm LED Batten Tri-CCT Microwave Sensor IP65 Rated Ektor
The 1200mm LED Batten with Tri-CCT and microwave sensor is perfect for commercial and industrial lighting applications.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: LED Batten Light, Tri-CCT LED Batten, Sensor LED Batten, Emergency LED Batten, IP65 LED Batten, Surface Mount LED Batten
Technical Specifications
- Total System Efficiency: up to 118 lm/W
- IP Rating: IP65
- IK Rating: IK08
- Body Material: Polycarbonate
- Diffuser Material: Polycarbonate
- Installation Type: Surface mount
- Working Temperature Range: -20 to 40 °C
- Input Frequency: 50 Hz
- Switch Type: Inline
- Power Factor: 0.9
- Maximum Wattage: 36 W
- Input Voltage: 230Vac (216-253Vac range)
- Input Current: 0.2 A
- Colour Rendering Index (CRI): >80
- CCT Configuration: TRI-CCT (4000K, 5000K, 6500K)
- Macadam Steps: 4-step MacAdam Ellipse
- LED Voltage: 42 V
- LED Current: 800-890 mA
- LED Lifetime: >60000 hours (L70B10 at 25°C and 40°C)
- Driver Type: Fixed output, constant current
- Dimmable: No
- Wiring Type: Re-wireable terminal block (3 pin)
- Short Term Light Modulation (PstLM): 0.1
- Stroboscopic Visibility Measure (SVM): 0.4
- Sensor Type: Microwave
- Sensor Detection Range: 10 m
- Sensor Time Delay: 5 seconds to 14 minutes
- Emergency Mode: Maintained with 90 minutes duration
- Emergency Output Power: 3600 mW
- Emergency Lumen Output: 400 lm
- Product Design Life: 8 years
- Daily Use Recommendation: 16 hours
- Dimensions (H x L x W): 60mm x 1200mm x 70mm
- Weight: 1.5 kg
Key Features
- Tri-CCT (Colour Temperature) configuration with 4000K, 5000K, and 6500K options
- IP65 rated for dust and water ingress protection
- IK08 impact resistance rating
- Microwave sensor with 10m detection range and adjustable settings
- Maintained emergency mode with 90 minutes duration
- High system efficiency up to 118 lm/W
- Long LED lifetime greater than 60,000 hours (L70B10)
- Fixed output driver with power factor of 0.9
- Surface mount installation with grey polycarbonate body and diffuser
- Complies with multiple Australian standards including AS/NZS 60598.1 and AS/NZS 2293.3
Professional Installation Requirements
- Professional installation by a qualified electrician is recommended to ensure compliance with electrical safety standards and optimal sensor configuration.
Applications
- Commercial and industrial lighting
- Warehouses and factories
- Car parks and corridors
- Outdoor covered areas requiring IP65 protection
Standards & Compliance
- AS/NZS 60598.1 – Luminaires General Requirements
- AS/NZS 60598.2.1 – Luminaires for General Lighting
- AS/NZS 61347.1 – Lamp Control Gear General and Safety Requirements
- AS/NZS 61347.2.13 – Particular Requirements for LED Modules
- AS CISPR 15 – Limits and Methods of Measurement of Radio Disturbance
- AS/NZS 2293.3 – Emergency Escape Lighting and Exit Signs
- AS/NZS 4268 – EMC for Lighting Equipment
Environmental Benefits
- Energy-efficient LED technology reduces power consumption
- Long product design life of 8 years reduces waste and replacement frequency
- Low standby power consumption of 1W for emergency models
- High lumen output per watt (up to 118 lm/W) maximizes lighting efficiency
Warranty Information
VIP Warranty: 2 years onsite and 3 years return-to-base (total 5 years). Standard warranty is return-to-base. Onsite warranty available to registered users in defined regions. Warranty valid up to 25,000 operating hours.
Available Now
The Ektor UMBRA ADVANCED 1200mm LED Batten with Tri-CCT and sensor is available for immediate purchase. Ideal for commercial, industrial, and emergency lighting applications requiring durable and efficient luminaires.
