ASI Safety Switch I10-E0313S02 Electro-Mechanical Sensor Power to Lock SICK
The ASI Safety Switch I10-E0313S02 features an electro-mechanical sensor principle and a power-to-lock mechanism
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: Safety interlock switch, Electro-mechanical safety switch, ASI safety interlock, Power to lock safety switch
Technical Specifications
- Sensor principle: Electro-mechanical
- Locking principle: Power to lock
- Positive action N/C solenoid monitoring contacts: 2
- N/O solenoid monitoring contacts: 0
- Positive action N/C door monitoring contacts: 1
- N/O door monitoring contacts: 1
- Locking force Fmax: 1,300 N (EN ISO 14119)
- Locking force FZh: 1,000 N (EN ISO 14119)
- Actuation force: ≥ 10 N
- Retaining force: ≤ 20 N
- Actuation frequency: ≤ 1,200 per hour
- Actuation directions: 4
- Approach speed: ≤ 20 m/min
- B10d parameter: 3 x 10^6 switching cycles (with small load)
- Type: Type 2 (EN ISO 14119)
- Actuator coding level: Low coding level (EN ISO 14119)
- Safe state in event of fault: No internal fault detection; fault detection by connected safety logic unit
- Connection type: Cable gland, 3 x M20
- Conductor cross section: 0.34 mm² to 1.5 mm²
- Contamination rating: 3
- Switching principle: Slow action switching element
- Usage category: AC-15/DC-13 (IEC 60947-5-1)
- Rated operating current: 4 A (230 V AC), 4 A (24 V DC)
- Rated insulation voltage Ui: 250 V
- Rated impulse withstand voltage Uimp: 2,500 V
- Type of output: Electro-mechanical contacts
- Power consumption: ≤ 8 W
- Short-circuit protection: 4 A gG
- Switching voltage: ≥ 12 V DC
- Switching current: 1 mA (24 V DC)
- Solenoid operating voltage: 20.4 V DC to 26.4 V DC
- Switch-on time of magnet: 100%
- Mechanical life: 1 x 10^6 switching cycles
- Enclosure rating: IP67 (IEC 60529)
- Ambient operating temperature: -20 °C to +55 °C
- Storage temperature: -20 °C to +55 °C
- Housing material: Glass-fiber reinforced thermoplastic
- Dimensions (H x L x W): 120mm x 40mm x 60mm
- Weight: 0.46 kg
Key Features
- Electro-mechanical sensor principle
- Power to lock locking principle
- 2 positive action N/C solenoid monitoring contacts
- 1 positive action N/C door monitoring contact and 1 N/O door monitoring contact
- Locking force Fmax 1,300 N (EN ISO 14119)
- Locking force FZh 1,000 N (EN ISO 14119)
- Actuation force ≥ 10 N
- Retaining force ≤ 20 N
- Actuation frequency up to 1,200 per hour
- 4 actuation directions
- Approach speed up to 20 m/min
- Slow action switching element
- Rated operating current 4 A (230 V AC) and 4 A (24 V DC)
- Rated insulation voltage 250 V
- Rated impulse withstand voltage 2,500 V
- Power consumption ≤ 8 W
- Short-circuit protection 4 A gG
- IP67 enclosure rating for dust and water protection
- Operating temperature range -20 °C to +55 °C
- Housing made of glass-fiber reinforced thermoplastic
Professional Installation Requirements
- Installation by qualified personnel is required to ensure compliance with safety standards and proper integration into safety systems.
Applications
- Industrial safety systems requiring electro-mechanical safety switches
- Machinery safety interlocks
- Access control for hazardous areas
Standards & Compliance
- Complies with AS/NZS 4801 – Occupational Health & Safety Management Systems
- Complies with AS/NZS 45001 – Occupational Health & Safety (aligned with ISO 45001)
Environmental Benefits
- Durable construction reduces waste and replacement frequency
- Low power consumption (≤ 8 W) supports energy efficiency
- High reliability reduces downtime and resource use
Warranty Information
Standard manufacturer warranty applies; please refer to SICK for specific warranty terms.
Available Now
The SICK I10-E0313S02 ASI Safety Switch is available for immediate purchase, ideal for industrial safety and machinery access control applications.
