SCHNAP Logo

Making Trade Life Easy!
Trade Discount 25%

Automation UPS 484W 0.65HP 1P True Sleep Mode Rollup

BRAND: CABAC
SKU: RD1000
$672.10 List price: $896.10
+ −
30 Days Return Electricians Unlock Trade Access
Rollup automation UPS features 484W 0.65HP single-phase output, true sleep mode, generator compatibility and audible alarms. Ideal for automated door backup.

Alternatively Known As: RollUPS RD1000, Rollup Automation UPS, Single-Phase Door Automation UPS, Gate and Roller Door Backup UPS

Technical Specifications
  • Model: RD1000
  • Recommended Motor Capacity: Up to 0.65 HP / 484 W with sleep mode
  • Maximum Output: 1,000 W
  • Input Voltage: 230 V ±25%
  • AVR Voltage Range: 165–275 V
  • Input Frequency Range: 40–70 Hz
  • Output Voltage Regulation: 230 V ±10%
  • Output Frequency: Utility-tracking in AC mode; 50 Hz ±0.5 Hz in battery mode
  • Waveform: Sine wave in AC mode; simulated sine wave in battery mode
  • Transfer Time: Typically 6 ms
  • Battery Type: Sealed lead-acid, maintenance-free
  • Battery Configuration: 2 x 12 V / 9 Ah
  • Recharge Time: Approximately 8 hours to 90% capacity after complete discharge
  • Communication: USB Power Manager
  • Surge Protection: RJ11
  • Outlets: 2 Australian outlets
  • Standby Time: Approximately 40 minutes
  • Maximum Door Openings: Approximately 2 cycles; based on 2-minute opening cycles
  • Operating Temperature: 0–40 °C, non-condensing
  • Operating Humidity: 0–95%
  • Audible Noise: Less than 40 dB
  • Protection: Electronic and fuse short-circuit protection
  • Functions: DC start, auto restart, automatic voltage regulation and audible alarms
  • Generator Compatibility: Suitable for compatible generator-backed installations
  • Dimensions (H x L x W): 408mm x 143mm x 197mm
  • Weight: 10.9 kg
Key Features
  • Provides backup power for automated doors, gates and roller shutters during power interruptions
  • Supports single-phase motors up to 0.65 HP or 484 W when using sleep mode
  • True sleep mode helps reduce battery consumption when the connected door motor is idle
  • Generator-compatible design for installations using standby generation
  • Automatic voltage regulation helps protect connected automation equipment from voltage fluctuations
  • LCD status display for input and output voltage, frequency, load, battery status, temperature and operating mode
  • USB connectivity for Power Manager monitoring
  • DC start and automatic restart functionality
  • Maintenance-free sealed lead-acid battery system
  • Audible and visual alarms for battery, overload, over-temperature and short-circuit conditions
Professional Installation Requirements
  • Installation and commissioning should be completed by a suitably qualified electrician or door-automation technician. Permanent electrical connections, earthing, isolation and integration with automated door equipment should comply with applicable wiring requirements, including AS/NZS 3000 where relevant.
Applications
  • Automated roller doors
  • Commercial and industrial sectional doors
  • Automatic gates and access barriers
  • Garage and warehouse door automation
  • Door motor backup during mains power failures
  • Generator-backed door automation systems
Standards & Compliance
  • AS 62040.1:2019 – applicable Australian safety standard for uninterruptible power systems; product-specific conformity should be confirmed from the supplier or manufacturer
  • AS/NZS 3000:2018 – applicable to permanent electrical installation, wiring, isolation and earthing; installation compliance is site-dependent
Environmental Benefits
  • Sleep mode can reduce standby energy consumption and help extend battery service life
  • Automatic voltage regulation can reduce stress on connected door-control electronics
  • Rechargeable sealed lead-acid batteries can be recovered through suitable battery recycling programmes
  • Provides short-duration backup without requiring a generator to run for every brief power interruption
  • Durable enclosure and replaceable battery design can help reduce whole-unit replacement waste
Warranty Information

2-year return-to-base warranty from PSS Distributors, based on the original purchase date. Repair or replacement is subject to the supplier’s warranty terms and exclusions.

Available Now

Available through PSS Distributors and authorised Australian trade distributors, subject to current stock and supply conditions.

UPS Sizing Calculator




This calculator follows relevant Australian standards to ensure reliable and compliant performance. It provides an estimated recommendation based on user inputs.
Users must verify specifications before purchasing.

Related Products