Trade Discount 20%
Bulk Solids Level Sensor Continuous Measurement IP67 Rated Variant-1 SICK
The Bulk Solids Level Sensor is designed for continuous measurement of bulk solids, featuring a high-accuracy plastic horn antenna and a W-band frequency range of
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Technical Specifications
- Medium: Bulk solids
- Measurement: Continuous
- Probe type: Plastic horn antenna made from PP
- Frequency band: W-band (75 to 85 GHz)
- Measuring range: Up to 120 m (recommended up to 20 m with integrated horn antenna)
- Angle of dispersion: 3.5°
- Process pressure: -1 bar to 2 bar (-100 kPa to 200 kPa)
- Process temperature: -40 °C to +80 °C
- Accuracy: ≤ 5 mm
- Non-repeatability: ≤ 1 mm
- Digital measurement resolution: < 1 mm
- Analog measurement resolution: 0.3 µA
- Measurement cycle time: Approx. 700 ms
- Step response time: ≤ 3 s
- MTBF: 3.37 million hours
- Communication interface: HART
- Supply voltage: 9 V DC to 30 V DC
- Protection class: I (IEC 61010-1)
- Connection type: M20 x 1.5 / plug connector M12 x 1 pin assignment B
- Output signal: 4 mA to 20 mA / HART
- Contamination rating: 4
- Enclosure rating: IP67
- EMC: EN 61326-1
- Start-up current: < 3.6 mA
- Overvoltage category: III (IEC 61010-1)
- Short-circuit protection: Yes
- Isolation: Yes
- Housing material: Aluminum die cast AlSi10Mg, powder-coated
- Sealing material: PP
- Antenna material: PP
- Ambient operating temperature: -40 °C to +80 °C
- Ambient storage temperature: -40 °C to +80 °C
- Display: Installed
- Control element: Bluetooth magnet pin operation
- Bluetooth: Yes
- Dimensions (H x L x W): 150mm x 80mm x 80mm
- Weight: 2.5 kg
Key Features
- Continuous measurement of bulk solids with high accuracy
- Plastic horn antenna made from polypropylene (PP)
- W-band frequency range (75 to 85 GHz) for precise sensing
- Measuring range up to 120 m, recommended up to 20 m with integrated horn antenna
- Bluetooth magnet pin operation for easy control
- HART communication interface for integration
- Robust aluminum die cast housing with powder coating
- IP67 rated enclosure for protection against dust and water
- Wide operating temperature range from -40 °C to +80 °C
- Short-circuit protection and isolation for safety
Professional Installation Requirements
- Installation by a qualified technician or engineer is recommended to ensure proper setup and calibration, especially for integration with process control systems.
Applications
- Bulk solids level measurement in industrial processes
- Continuous monitoring in storage silos and hoppers
- Process control in manufacturing and material handling
Standards & Compliance
- Complies with AS/NZS 4801 – Occupational Health & Safety Management Systems
- Complies with AS/NZS 61010-1 (IEC 61010-1) for electrical safety
Environmental Benefits
- Enables efficient material management reducing waste
- Durable design reduces need for frequent replacements
- Low power consumption with 9-30 V DC supply
Warranty Information
Standard manufacturer warranty applies; please refer to SICK for specific terms and duration.
Available Now
The SICK LBR-XXBXXCBHKKX sensor is available for immediate purchase, ideal for industrial bulk solids measurement applications.
