SCHNAP Logo

Making Trade Life Easy!

Data & Comms Cable

$141.30 $113.40
This Allen-Bradley Cat5e ethernet lead has an RJ45 8-pin connector on one end and a free conductor end on the other, running 5m in a turquoise 600V rated PUR jacket suited to industrial and commercial networking. It's shielded for reduced interference and flame retardant according to IEC/EN 60332-3-24. The cable complies with relevant Australian standards for electrical safety. Full technical specifications and installation notes are listed below.
+

$223.50 $179.40
This Allen-Bradley Cat5e ethernet cable has RJ45 8-pin connectors on both ends, running 10.5m in a hi-flex TPE jacket suited to cable guide chains and industrial networking. It's built for enhanced flexibility and durability in automation and control systems. The cable is flame retardant according to IEC/EN 60332-3-24 for safe industrial installation. Full technical specifications and installation notes are listed below.
+

$2,628.40 $2,109.20
This professional RG6 coaxial cable is engineered to deliver reliable high-speed data transmission within demanding ControlNet media automation networks. It is supplied as a continuous 305-meter drum run to cover long industrial cable spans without intermediate splicing. Built with a durable outer construction to withstand heavy industrial wear, the cable complies fully with relevant Australian standards for electrical and telecommunication cables. See the full description below for specific spool dimensions, weights, and recommended routing layouts.
+

$877.30 $704.00
This professional ControlNet coax media tap kit is engineered explicitly for demanding industrial automation environments. Featuring a robust IP67 ingress rating, the unit provides total protection against heavy dust and water entry in commercial networking setups. The integrated removable drop cable allows for highly flexible and straightforward technical installation. Review the complete casing dimensions, application parameters, and electrical compliance details below before choosing your configuration.
+

$1,301.20 $1,044.10
This professional ControlNet TNC T-tap coaxial media module is engineered for heavy-duty industrial control and automation networking systems. Featuring an IP67 rating for excellent protection against dust and water ingress, it provides durable and reliable signal distribution in rugged commercial environments. The compact unit incorporates high-quality construction parameters to minimize maintenance or frequent replacements under demanding plant conditions. Check the full dimensional metrics, component weights, and installation guidelines below to construct your hardware layout.
+

$1,486.70 $1,193.00
This professional-grade Allen-Bradley 34m accelerometer cable is engineered specifically for secure, long-distance signal transmission in demanding industrial automation and control networks. It features a tinned 3-core configuration with triple-element stranding, insulated by premium Ethylene tetrafluoroethylene (ETFE) to deliver excellent protection against physical wear, chemical exposure, and high temperatures. Fully compliant with AS/NZS 60950 safety standards for IT and communication equipment, this blue-sheathed cable maintains an impedance rating of 78.5 Ohm to ensure superior diagnostic and vibration telemetry accuracy over extended runs.
+

$8,017.00 $6,433.40
This NHP thick DeviceNet cable is a pre-wired solution built for industrial automation and control network connections. It runs to a full 300m length with an IP67 rating for durable, moisture-resistant performance. The cable meets relevant Australian standards for electrical installations, giving added confidence for industrial and commercial use. Full specifications, dimensions and installation details are covered further down the page.
+

$206.00 $165.30
This NHP thin DeviceNet cable is built for drop line connections with a micro female bus-style connector. It's rated at 4A and 250V with an IP67 rating for dust and water resistance, and comes in a 5m length. The cable complies with relevant Australian standards for electrical safety. See the full description below for dimensions, ratings, and installation requirements.
+

$435.10 $349.10
This professional RG6 coaxial ControlNet media cable components kit is designed specifically for demanding industrial automation setups. Engineered with a right-angle T-tap configuration, the system provides an optimal, space-saving installation solution inside congested control panels. The physical assembly complies fully with relevant Australian standards for electrical components to ensure high-speed signal integrity and plant safety. See the complete dimensions, weights, and detailed connection diagrams below to finalize your networking design.
+

$435.10 $349.10
This professional ControlNet coax right-angle Y-tap is specifically engineered for tight or constrained commercial and industrial networking systems. Designed with a specialised low-profile orientation, it provides space-saving convenience inside complex automation routing configurations. The heavy-duty structure complies fully with relevant Australian standards for electrical components to ensure certified plant safety and performance. Review the full physical profile dimensions, unit weights, and compatibility guidelines outlined below to plan your connection scheme.
+

$435.10 $349.10

This professional ControlNet coax media tap kit is engineered explicitly for demanding industrial automation environments. Featuring a robust IP67 ingress rating, the unit provides total protection against heavy dust and water entry in commercial networking setups. The integrated removable drop cable allows for highly flexible and straightforward technical installation. Review the complete casing dimensions, application parameters, and electrical compliance details below before choosing your configuration.

+

$426.20 $342.00
Built for condition-monitoring instrumentation, this NHP eddy current probe extension cable runs 4.5m in an armored, 3-core configuration. A copper conductor and blue outer sheath support reliable signal transmission when used in conjunction with NCPU for eddy current sensing applications. The cable complies with AS/NZS 3000 for electrical installations. Full technical specifications and installation notes are listed below.
+

$696.30 $558.80
Built for condition-monitoring instrumentation, this NHP eddy current probe extension cable runs 8m in an armored, 3-core configuration. A copper conductor with triple stranding and a blue outer sheath support use in industrial automation and control systems, suitable for connecting eddy current probes. The cable complies with AS/NZS 60950 for safety of IT and communication equipment. Full technical specifications and installation notes are listed below.
+

$745.60 $598.30
This professional-grade Allen-Bradley 20m intrinsically safe accelerometer cable is engineered for high-reliability signal transmission in rugged industrial automation, control, and data communication systems. Constructed with durable Ethylene tetrafluoroethylene (ETFE) core insulation and a 2-pin shielded configuration, it offers excellent physical protection and noise resistance in sensitive zones. Fully compliant with AS/NZS 60950 standards for IT and communication equipment safety, this blue-jacketed cable features tinned conductor surfaces and a 78.5 Ohm impedance rating to maintain superior signal integrity over long runs.
+

$407.50 $327.00
This professional-grade Allen-Bradley 5m accelerometer cable is engineered specifically for secure, high-integrity signal transmission in demanding industrial automation and control networks. It features a tinned 3-core configuration with triple-element stranding, insulated by premium Ethylene tetrafluoroethylene (ETFE) to deliver excellent protection against physical wear, chemical exposure, and temperature extremes. Fully compliant with AS/NZS 60950 safety standards for IT and communication equipment, this blue-sheathed cable maintains a strict impedance rating of 78.5 Ohm to optimize telemetry and diagnostic accuracy.
+

$429.40 $344.60
This NHP DeviceNet thick cable features a 5 pole configuration engineered for industrial automation systems, control networks, and commercial machinery installations. It is built with gold-plated copper contacts, a plastic material housing, and an unshielded shielding layout to support robust data communication. The assembly provides an IP67 protection rating for exceptional dust and water resistance across an operating temperature range of -20°C to +70°C. Check the product details and compatible accessories below before ordering.
+

$1,418.20 $1,138.10
This NHP thick DeviceNet cable suits panel-level automation and control network connections. It's rated at 8A and 300V with an IP67 rating, and features a gold contact surface for reliable conductivity. The cable is built with durable PVC insulation to handle demanding industrial environments. Check the product details and compatible accessories below before ordering.
+

$13,597.10 $10,911.30
This NHP thin DeviceNet cable suits large-scale industrial automation network wiring. It's rated at 4A and 250V with an IP67 rating for dust and water resistance, and comes in a full 600m length. The cable complies with AS/NZS 60950 for safety of IT and communication equipment. Spec sheet and application notes are available in the section below.
+

$3,387.10 $2,718.00
This NHP thin DeviceNet cable is designed for trunk and drop line wiring in industrial automation networks. It's rated at 4A and 250V with an IP67 rating for dust and water resistance, and runs to a full 150m length. The cable complies with AS/NZS 60950 for safety of IT and communication equipment. Check the product details and compatible accessories below before ordering.
+

$9,558.40 $7,670.30
Supplying industrial automation systems and control networks for machinery, this DeviceNet cable runs 420m in a grey IP67-rated jacket. It carries a 4A rated current through AWG 22 conductors with PVC core insulation for reliable data communication in manufacturing environments. Complying with AS/NZS 3000, it suits fixed bulk-length runs where a full drum is needed on site. Technical specifications and installation notes are set out further down the page.
+

$1,964.80 $1,576.70
Suited to industrial automation systems, control networks for machinery and data communication in manufacturing environments, this DeviceNet KwikLink cable supplies a 75m grey heavy duty run with a 4A rated current. It's built with PVC core insulation and uncoated plastic housing, rated IP67 for reliable power delivery in demanding sites. Complying with AS/NZS 60950, the grey jacket distinguishes it from the black version of the same length. See the full description below for dimensions, ratings, and installation requirements.
+

$2,427.10 $1,947.60
Suited to longer industrial automation bus runs, this DeviceNet KwikLink cable supplies a 75m black heavy duty run with a 4A rated current. It's built with PVC core insulation and uncoated plastic housing, rated IP67 for industrial and commercial environments where protection from dust and moisture is required. Complying with AS/NZS 60950, the freely positionable mounting method suits building management and control network installations. Full technical specifications and installation notes are listed below.
+

$210.70 $169.10
This NHP DeviceNet thick patch cable features a 5 pole configuration engineered for reliable data communication in industrial automation systems, machinery setups, and control networks. It is built with gold-plated copper contacts and a plastic housing material to support robust signal transfer in commercial industrial networks. The pre-assembled connection provides an IP67 protection rating for dependable dust and water resistance across an operating temperature range of -20°C to +70°C. Wiring diagrams and compliance documentation are covered further down the page.
+

$249.30 $200.00
This heavy duty five pole cable provides robust connectivity for industrial automation systems and commercial building management networks. Engineered with a durable plastic housing and gold-plated contacts, it features a 12.2mm cable diameter designed to withstand tough industrial environments. An IP67 protection rating ensures reliable dust and water resistance across demanding commercial control setups. See the full description below for dimensions, ratings, and installation requirements.
+

$122.70 $98.50
Well suited to tight panel or enclosure installations, this DeviceNet KwikLink cable delivers a 4A rated current through a right angle male plug connector saving space in compact layouts. The 2m length runs at 6mm diameter with PVC insulation and gold contact surfaces, rated IP20 for protection against solid objects in industrial and building management settings. Complying with AS/NZS 60950, it suits indoor panel and control cabinet use. Check the product details and compatible accessories below before ordering.
+

$148.50 $119.20
Built for industrial automation systems, control networks and building management data communication, this DeviceNet KwikLink cable sits at 5m in length between the shorter 4m and longer 6m right angle options. It delivers a 4A rated current through a right angle male plug connector, with PVC insulation and gold contact surfaces rated IP20 for protection against solid objects. Complying with AS/NZS 60950, it's built for heavy-duty performance in industrial environments. Check the product details and compatible accessories below before ordering.
+

$182.70 $146.60
This Allen-Bradley distributed NHP DeviceNet thin yellow drop line cable features a 5 pole configuration engineered for industrial automation systems, control networks, and commercial building management data communication. Built with gold-plated contacts and a durable plastic housing, it provides reliable signal transfer across an operating temperature range of -20°C to +70°C. The assembly delivers an IP67 protection rating to safeguard against dust and water ingress in harsh environments. Review complete technical dimensions and compliance standards listed below before purchasing.
+

$206.00 $165.30
This NHP thin DeviceNet cable is built for drop line connections with a mini male connector and gold contact surface for improved conductivity. It's rated at 4A and 250V with an IP67 rating for dust and water ingress protection, and comes in a 5m length. The cable complies with AS/NZS 60950 for safety of IT and communication equipment. Full technical specifications and installation notes are listed below.
+

$252.30 $202.40
Built for industrial automation systems and control networks, this DeviceNet cable runs 5m in a yellow IP67-rated jacket. It carries a 4A rated current at 250V through a 5-pole female bus connector with gold contact surfaces for reliable signal transfer. Complying with AS/NZS 60950, it suits fixed bus connections across automation and building management setups. Full specifications and installation requirements are covered further down the page.
+

$170.80 $137.10
Suited to industrial automation and commercial networking, this Allen-Bradley cable connects M12 to RJ45 8(4) with a hi-flex TPE jacket in turquoise. It's IP67 rated at the M12 connector and IP20 at the RJ45 connector, with flame retardant performance to IEC/EN 60332-3-24. The 2m CAT5e cable complies with AS/NZS 60950 safety standards for IT and communication equipment. Check the product details and compatible accessories below before ordering.
+

$209.50 $168.10
This Allen-Bradley Cat5e ethernet cable has an M12 connector on one end and an RJ45 8-pin connector on the other, running 5m in a turquoise PUR jacket built for high flexibility in dynamic automation applications. It's IP67 rated at the M12 connector and IP20 at the RJ45 for protection against dust and water. The cable is flame retardant according to IEC/EN 60332-3-24 for safe industrial installation. Full technical specifications and installation notes are listed below.
+

$475.20 $381.30
This Allen-Bradley Cat5e ethernet cable has M12 male-to-female connectors on both ends, running 20m in a turquoise hi-flex PUR jacket suited to factory automation and control systems. It's shielded for reduced interference and IP67 rated on both connectors for protection against dust and water. The cable is flame retardant according to IEC/EN 60332-3-24 for safe industrial installation. Full technical specifications and installation notes are listed below.
+

$109.40 $87.80
Suited to industrial Ethernet networks and commercial office setups, this Allen-Bradley cable runs RJ45 8(4) connectors on both ends with a turquoise, high-flex TPE jacket for dynamic applications. It's IP20 rated with flame retardant performance to IEC/EN 60332-3-24. The 2m CAT5e cable complies with AS/NZS 60950 safety standards for IT and communication equipment. Spec sheet and application notes are available in the section below.
+

$116.00 $93.10
This Allen-Bradley Cat5e ethernet cable has RJ45 8-pin connectors on both ends, running 2m in a turquoise PUR jacket suited to reliable data transmission in networking and office environments. It's shielded for reduced interference and flame retardant according to IEC/EN 60332-3-24. The cable complies with AS/NZS 60950 for IT and communication equipment safety. Full technical specifications and installation notes are listed below.
+

$98.20 $78.80
This Allen-Bradley Cat5e ethernet cable has RJ45 8-pin connectors on both ends, running 2m in a turquoise unshielded riser PVC jacket suited to LAN networking and office environments. It's built with a 4 pair Cat5e configuration for high-speed data transmission and is flame retardant according to IEC/EN 60332-3-24. The cable complies with AS/NZS 60950 for IT and communication equipment safety. Full technical specifications and installation notes are listed below.
+

-