SCHNAP Logo

Making Trade Life Easy!

Electrical

$12.80 $9.60
Jonsa 2-Way CATV tap provides 16dB tap loss, 5-2400MHz frequency range. Suited for MATV multi-outlet distribution.
+

$1.00 $0.80
Jonsa F to F barrel adaptor rated to 3GHz and supplied with nut and washer. Joins coaxial runs for satellite, MATV and NBN installations.
+

$12.80 $9.60
Jonsa 2-Way CATV tap provides 20dB tap loss, 5-2400MHz frequency range. Suited for MATV multi-outlet distribution.
+

$156.50 $117.40
Jonsa 19in 1RU front face plate suits the FTA DVB-T headend regenerator. 482x300mm rack-mount panel in grey.
+

$17.90 $13.40
Jonsa 4-Way CATV tap provides 16dB tap loss, 5-2400MHz frequency range. Suited for MATV multi-outlet distribution.
+

$17.90 $13.40
Jonsa 4-Way CATV tap provides 20dB tap loss, 5-2400MHz frequency range. Suited for MATV multi-outlet distribution.
+

$827.50 $620.60
Jonsa Satellite Dish Offset Fixed Galvanised Steel Powder features 93.6cm vertical axis and 512mm length. Ideal for single and multi-dwelling units. Pack of 4.
+

$445.30 $334.00
Jonsa Satellite Dish Offset Fixed Polyester Coating Weather features 72.62cm vertical axis and 392mm length. Pack of 4.
+

$492.30 $369.30
Jonsa 5-Wire 12-Out multiswitch distributes Foxtel satellite signals. Suited for MDU and multi-room Foxtel installs.
+

$70.70 $53.10
Day night sensor featuring IP66. Ideal for outdoor, marine and washdown installations.
+

$102.10 $76.60
Movement sensor featuring IP65. Ideal for outdoor, marine and washdown installations.
+

$70.70 $53.10
This infrared motion sensor from CLA Lighting offers 120° detection with a range of up to 12m, suited to homes, garages, and outdoor areas. It's IP66 rated with a UV resistant polycarbonate housing, handling loads up to 2000W HAL, 1000W CFL, or 1000W LED. Adjustable time delay from 10 seconds to 30 minutes and ambient light sensitivity from 3 to 2000 lux allow flexible configuration. Complies with AS/NZS 3820 for essential safety requirements. See the full description below for dimensions, ratings, and installation requirements.
+

$102.10 $76.60
Day night sensor featuring IP65, black. Ideal for outdoor, marine and washdown installations.
+

$15.30 $12.70
CLA C-Bus dimmer features 13x15W to 10x20W, 50mm x 100mm x 100mm, 0.5 kg. Ideal for residential: Homes, apartments, and lighting control in various rooms.
+

$7.20 $5.40
CLA Lighting rewirable 3-pin male plug top, clear plastic, 10A. Easy repairs and replacement for various electrical leads.
+

$8.50 $6.40
CLA Lighting rewirable 3-pin plug top rated 10A in clear finish. Easy-repair design for quick cord replacement.
+

$11.80 $8.80
This CLA Lighting piggyback extension lead is IP20 rated with a 3x1.5mm² cable and single or double cable connectors for flexible use. It runs 1 metre, weighs 0.5kg, and features a transparent PC construction with copper screw terminals. Complies with AS/NZS 3112 for plugs and socket-outlets, suited to homes, apartments, offices and retail or hospitality settings. Full technical specifications and installation notes are listed below.
+

$16.20 $12.10
This CLA Lighting piggyback extension lead is IP20 rated with a 3x1.5mm² cable and single or double cable connectors for flexible use. It runs 2 metres, weighs 0.5kg, and features a transparent PC construction with copper screw terminals. Complies with AS/NZS 3112 for plugs and socket-outlets, suited to homes, apartments, offices and retail or hospitality settings. Full technical specifications and installation notes are listed below.
+

$20.60 $15.40
This CLA Lighting piggyback extension lead is IP20 rated with a 3x1.5mm² cable and single or double cable connectors for flexible use. It runs 3 metres, weighs 0.5kg, and features a transparent PC construction with copper screw terminals. Complies with AS/NZS 3112 for plugs and socket-outlets, suited to homes, apartments, offices and retail or hospitality settings. Full technical specifications and installation notes are listed below.
+

$3.50 $2.60
240V flex & plug with 1200mm length and 2 wire design—ideal for residential and commercial applications.
+

$29.80 $22.40
This CLA Lighting piggyback extension lead is IP20 rated with a 3x1.5mm² cable and single or double cable connectors for flexible use. It runs 5 metres, weighs 0.5kg, and features a transparent PC construction with copper screw terminals. Complies with AS/NZS 3112 for plugs and socket-outlets, suited to homes, apartments, offices and retail or hospitality settings. Full technical specifications and installation notes are listed below.
+

$5.80 $4.40
240V flex & plug with 2 wire design and 2000mm length—ideal for residential and commercial spaces. Built for easy installation
+

$50.90 $38.10
This CLA Lighting piggyback extension lead is IP20 rated with a 3x1.5mm² cable and single or double cable connectors for flexible use. It runs 10 metres, weighs 1.0kg, and features a transparent PC construction with copper screw terminals. Complies with AS/NZS 3112 for plugs and socket-outlets, suited to homes, apartments, offices and construction sites. Full technical specifications and installation notes are listed below.
+

$10.50 $7.90
240V flex & plug with 2000mm length and 3 wire configuration—ideal for residential and commercial spaces.
+

$65.90 $49.40
This CLA Lighting piggyback extension lead is IP20 rated with a 3x1.5mm² cable and single or double cable connectors for flexible use. It runs 15 metres, weighs 1.5kg, and features a transparent PC construction with copper screw terminals. Complies with AS/NZS 3112 for plugs and socket-outlets, suited to homes, apartments, offices and retail or hospitality settings. Full technical specifications and installation notes are listed below.
+

$5.80 $4.40
240V flex & plug with 2000mm length and 2 wire design—ideal for residential and commercial applications.
+

$91.80 $68.80
This CLA Lighting piggyback extension lead is IP20 rated with a 3x1.5mm² cable and single or double cable connectors for flexible use. It runs 20 metres, weighs 1.5kg, and features a transparent PC construction with copper screw terminals. Complies with AS/NZS 3112 for plugs and socket-outlets, suited to homes, apartments, offices, workshops and construction sites. Full technical specifications and installation notes are listed below.
+

$10.50 $7.90
240V flex & plug with 3 wire design and 2000mm length—ideal for homes and commercial spaces. Built for flexible power solutions
+

$111.20 $83.40
This CLA Lighting heavy duty extension lead runs 15A over a full 25 metres, built with 1.0mm² cable and an IP20 rated housing for reliable indoor and outdoor use. It features transparent PC construction with copper screw terminals for durable, safe connections. Compliant with AS/NZS 3112 for plugs and socket-outlets, it's rated to a max current of 32A across the connector. Full specs and installation notes are covered further down the page.
+

$10.50 $7.90
Flex & plug cable with 240V input for 12V applications, featuring a 3000mm length and 2×0.75mm² diameter—ideal for residential and commercial use.
+

$133.00 $99.70
This CLA Lighting piggyback extension lead is IP20 rated with a 3x1.5mm² cable and single or double cable connectors for flexible use. It runs 30 metres, weighs 1.5kg, and features a transparent PC construction with copper screw terminals. Complies with AS/NZS 3112 for plugs and socket-outlets, suited to homes, garages, worksites and temporary event setups. Full technical specifications and installation notes are listed below.
+

$13.40 $10.10
240V flex & plug with 3000mm length and 3 wire design—ideal for residential and commercial applications.
+

$9.30 $6.90
This CLA Lighting 10A extension lead is a compact 2m option, ideal for homes, apartments, offices, and hospitality spaces needing flexible indoor power access. Built with 1.0mm² cable and rated IP20, it measures 30mm x 2000mm x 50mm (H x L x W) and weighs 0.5kg. It's compliant with AS/NZS 3112 for plugs and socket-outlets, backed by a 1 year warranty against manufacturing defects. Full specs and installation notes are listed further down the page.
+

$11.80 $8.80
This CLA Lighting 10A extension lead runs 3m in length, suited to homes, apartments, offices, and hospitality spaces needing flexible indoor power access. Built with 1.0mm² cable and rated IP20, it measures 30mm x 3000mm x 30mm (H x L x W) and weighs 0.5kg. It's compliant with AS/NZS 3112 for plugs and socket-outlets, backed by a 1 year warranty against manufacturing defects. Full specs and installation notes are listed further down the page.
+

$18.20 $13.60
This CLA Lighting 10A extension lead runs 5m in length, suited to homes, apartments, offices, and hospitality spaces needing extended indoor power access. Built with 1.0mm² cable and rated IP20, it measures 50mm x 5000mm x 50mm (H x L x W) and weighs 0.5kg. It's compliant with AS/NZS 3112 for plugs and socket-outlets, backed by a 1 year warranty against manufacturing defects. Full specs and installation notes are listed further down the page.
+

-