SCHNAP Logo

Making Trade Life Easy!

Industrial

$188.20 $151.00
CA7 contactor coil with 400-415V AC voltage—ideal for industrial automation and commercial HVAC systems.
+

$413.20 $331.60
Direct online motor starter with 5.5kW power and mushroom stop—ideal for industrial and commercial motor control.
+

$355.10 $285.00
Carrier bar with 400mm width and 2500N strength—ideal for industrial and commercial mounting solutions.
+

$398.70 $319.90
Steel carrier bar with 600mm length and 1800N load capacity—ideal for industrial and commercial mounting applications.
+

$103.50 $83.10
Panelboard locking rods designed for Concept Plus and Premier panelboards, featuring enhanced security for 6 modules—ideal for residential and commercial
+

$73.60 $59.10
Panelboard accessory door hinge with durable black zinc finish and steel pin—ideal for residential and commercial applications.
+

$76.20 $61.10
Mounting adapter designed for CEP71 Frame B with durable construction and dimensions of 117mm x 89mm x 45mm—ideal for industrial and commercial electrical
+

$410.40 $329.30
19 inch width reducers with metal construction and 800mm depth—ideal for industrial and commercial enclosure applications.
+

$463.60 $372.00
Level sensor controller with 24V AC DC power and 4 points SPST relay output—ideal for industrial and commercial level monitoring.
+

$234.40 $188.10
Conductive level sensor with 2000mm insertion length and stainless steel construction—ideal for industrial and commercial liquid measurement.
+

$500.00 $401.20
FS Click In Profile with snap mounting and untreated steel—ideal for industrial and commercial electrical enclosures.
+

$759.60 $609.60
Side mounting bar with 600mm length and durable steel construction—ideal for industrial and commercial enclosures.
+

$1,752.60 $1,406.40
Panelboard accessory module with 648mm height and IP40 rating—ideal for residential and commercial electrical installations.
+

$188.40 $151.20
Panelboard gland plate with durable aluminium construction and IP42 rating—ideal for industrial and commercial electrical enclosures.
+

$81.10 $65.10
Panelboard accessory gland plate with IP66 rating and durable aluminium construction—ideal for industrial and commercial electrical installations.
+

$128.70 $103.30
Coil suppressor RC module with 24-48VAC voltage range and surge protection—ideal for industrial and commercial AC control systems.
+

$122.70 $98.50
Auxiliary contact block with 3NO and 1NC contacts—ideal for industrial and commercial control systems.
+

$9.10 $7.30
Emergency stop legend plate with 60mm round design and 22.5mm compatibility—ideal for industrial and commercial safety systems.
+

$9.80 $7.90
Legend plate with snap-in design and 30x50mm size—ideal for industrial and commercial labeling. Built for high visibility with durable black plastic and clear white
+

$9.80 $7.90
Legend plate with snap-in design and clear white text—ideal for industrial control panels and commercial equipment.
+

$214.60 $172.20
Metal control enclosure with 22.5mm hole and IP66 rating—ideal for industrial and commercial control panels.
+

$9.30 $7.50
NHP D7 series colour cap — extended (raised) profile, RED, for MULTI-FUNCTION operators. Per Sprecher+Schuh, this is the 'Bottom Extended' position cap for multi-function operator heads — paired with D7-AUB2 D7-AUB1 sealing caps. NOT a standard extended pushbutton cap.
+

$9.80 $7.90
NHP D7 series colour cap insert — flush profile, BLACK with 'LOWER' engraved legend (CE152). Snap-fits into D7P-F9 D7M-F9 operator heads. Pre-engraved white text on black plate for permanent function marking. IP66 standard, IP69K with D7-AB7 boot.
+

$9.80 $7.90
NHP D7 series colour cap insert — flush profile, BLACK with 'OPEN' engraved legend (CE170). Snap-fits into D7P-F9 D7M-F9 operator heads. Pre-engraved white-on-black plate. IP66 standard, IP69K with D7-AB7 boot.
+

$9.80 $7.90
NHP D7 series colour cap insert — flush profile, BLACK with engraved legend code CE219. CE219 is not listed in the standard NHP D7 brochure legend table (CE107-CE303) — likely a less common variant or special-order code. Refer to NHP datasheet for exact marking. Snap-fits into D7P-F9 D7M-F9 operator heads. IP66 standard.
+

$9.80 $7.90
NHP D7 series colour cap insert — flush profile, BLACK with 'UP' engraved legend (CE223). Snap-fits into D7P-F9 D7M-F9 operator heads. Pre-engraved white-on-black plate. IP66 standard, IP69K with D7-AB7 boot.
+

$9.80 $7.90
Green pushbutton cap designed for 22.5mm operator control devices—ideal for industrial control panels and commercial equipment.
+

$9.80 $7.90
NHP D7 series colour cap insert — flush profile, GREEN with 'FORWARD' engraved legend (CE120). Snap-fits into D7P-F9 D7M-F9 operator heads. IP66 standard, IP69K with D7-AB7 boot.
+

$9.80 $7.90
NHP D7 series colour cap insert — flush profile, GREEN with 'OPEN' engraved legend (CE170). Snap-fits into D7P-F9 D7M-F9 operator heads. IP66 standard, IP69K with D7-AB7 boot.
+

$5.70 $4.60
Pushbutton cap with 22.5mm diameter and red color—ideal for industrial control panels and machinery. Built for easy identification
+

$9.80 $7.90
NHP D7 series colour cap insert — flush profile, BLUE pre-engraved variant code 11 (legacy 3-digit code format, akin to D7-AF301 Start green or D7-AF402 Stop red). Exact marking for code 11 is not listed in the supplied NHP brochure — refer to NHP datasheet for definitive engraving text. Snap-fits into D7P-F9 D7M-F9 operator heads. IP66 standard.
+

$5.70 $4.60
Pushbutton colour cap with 22.5mm size and blue finish—ideal for industrial control panels and commercial equipment.
+

$8.30 $6.60
Pushbutton colour cap with 22.5mm size and black finish—ideal for industrial control panels and commercial equipment.
+

$43.10 $34.60
Mounting hole adaptor with 30.5mm dimensions for 22.5mm operator control devices—ideal for industrial applications.
+

$16.70 $13.40
Amber lens cap designed for 22.5mm illuminated pushbuttons, featuring a flush design and durable plastic construction—ideal for industrial control panels and
+

-