Industrial Ethernet Cable M12 to RJ45 Cat6A 20m PUR Green SICK
Designed for industrial Ethernet connections in zones with oils and lubricants, this SICK cable runs an angled M12, 8-pin, X-coded connector to a straight RJ45, 8-pin connector. The 20m shielded CAT6A cable has a green PUR jacket, supports data rates up to 10 Gbit/s, and is IP65/IP67 rated at the M12 end and IP20 at the RJ45 end. It's built to AS/NZS 60950 safety standards, operating from -40°C to +85°C. See the full description below for dimensions, ratings, and installation requirements.
Sign in
Please login to continue to your account.
- Connection type head A: Male connector, M12, 8-pin, straight, X-coded
- Connection type head B: Male connector, RJ45, 8-pin, straight
- Locking plug connector: Screw-on connection (M12), snap-in locking (RJ45)
- Connector material: TPU
- Locking nut material: Zinc die-cast, nickel-plated
- Tightening torque: 0.6 Nm
- Cable: 20 m, 8-wire, PUR, halogen-free
- Cable diameter: 6.4 mm
- Conductor cross section: 0.14 mm²
- Shielding: Shielded
- Bending radius flexible use: > 10 x cable diameter
- Bending radius stationary position: > 8 x cable diameter
- Nominal voltage, cable: 125 V AC
- Test voltage, cable: 1,000 V AC
- Reference voltage: 48 V AC / 60 V DC
- Rated impulse voltage: 1 kV
- Current loading: 0.5 A
- Signal type: Ethernet, Gigabit Ethernet
- Transmission characteristics: CAT6A
- Data transmission rate: ≤ 10 Gbit/s
- Application: Zones with oils and lubricants
- Enclosure rating: IP65/IP67 (M12), IP20 (RJ45)
- Operating temperature head: -25 °C to +85 °C
- Operating temperature stationary position: -40 °C to +80 °C
- Contamination rating: 3
- Insulation resistance: > 100 mΩ
- Overvoltage category: III
- Thermal resistance piping: Flame retardant acc. to UL 1581 Section 1090, Section 1100 (FT2), Section 1080 (VW-1) / IEC 60332-1-2
- Dimensions (H x L x W): 20mm x 20000mm x 13mm
- Weight: 0.3 kg
- Male connector M12, 8-pin, straight, X-coded
- Male connector RJ45, 8-pin, straight
- Screw-on connection (M12) and snap-in locking (RJ45)
- Cable length 20 m, 8-wire, PUR, halogen-free
- Shielded cable with CAT6A transmission characteristics
- Data transmission rate up to 10 Gbit/s
- Operating temperature range -40 °C to +85 °C
- Enclosure rating IP65/IP67 (M12), IP20 (RJ45)
- Flame retardant cable according to UL 1581 and IEC 60332-1-2
- Installation by qualified personnel is recommended to ensure proper connection and compliance with safety standards.
- Industrial Ethernet connections in zones with oils and lubricants
- Data transmission for Gigabit Ethernet networks
- Use in environments requiring IP65/IP67 protection
- AS/NZS 60950 – Safety of IT and Communication Equipment
- Halogen-free PUR jacket reduces environmental impact during disposal
- Flame retardant materials enhance safety and reduce fire hazards
Standard manufacturer warranty applies; please refer to SICK's official warranty policy.
The SICK YM2X18-200EG1MRJA8 Ethernet Cable is available for immediate purchase, ideal for industrial Ethernet applications requiring robust and reliable data transmission.
Q: What connectors does this cable use?
A: It has a male M12, 8-pin, straight, X-coded connector on one end and a male RJ45, 8-pin, straight connector on the other, with screw-on locking for M12 and snap-in locking for RJ45.
Q: What data rate does this cable support?
A: It supports transmission rates up to 10 Gbit/s over shielded CAT6A conductors, and it's backed by SCHNAP's 30-day returns policy for added purchasing confidence.
For a shorter M12 to RJ45 run in the same shielded Cat6A range, the industrial ethernet cable rated 10m green is also available.
An M12 push-pull Cat6A ethernet cable is also available for a fully M12-to-RJ45 shielded configuration.
The wider industrial ethernet and fieldbus cable range covers additional lengths and connector configurations.
Add to your order today and ship Australia-wide with SCHNAP's reliable delivery network.