Trade Discount 25%
Liquid Tight Conduit Fitting Straight 4 Inch NPT Zinc Alloy Cabac
Cabac liquid tight straight conduit fitting 4 inch NPT in zinc plated alloy features sealing gasket, gland ring and IP66 with TriFlex conduit. Ideal for 100mm runs.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Alternatively Known As: 4 Inch Liquidtight Conduit Connector, CLT100 Straight Fitting, Zinc Alloy NPT Conduit Fitting
Technical Specifications
- Part Number: LTCNPT-19
- Conduit Compatibility: CABFLX CLT100BK TriFlex liquidtight conduit
- Trade Size: 4 inch / 100 mm
- Connection Thread: 4 inch NPT
- Fitting Type: Straight metallic liquidtight fitting
- Material: Die-chromate zinc-plated alloy
- Sealing Components: Sealing gasket, protective gland ring and large sealing ferrule
- Included Components: Locknut and grounding cone
- Ingress Protection: IP66 when installed with compatible CABFLX TriFlex conduit
- Approximate Flats: 148 mm
- Approximate Overall Length: 77 mm
- Approximate Thread Length: 30 mm
- Weight: Approximately 1.8 kg; estimated where no manufacturer-published figure was located
- Dimensions (H x L x W): 148mm x 77mm x 148mm
- Weight: 1.8 kg
Key Features
- Terminates 100 mm CABFLX liquidtight conduit into enclosures, machinery and equipment
- Zinc-plated alloy construction provides mechanical strength and corrosion resistance
- NPT threaded connection for compatible enclosures and equipment
- Sealing gasket and gland ring support liquidtight installation
- Large sealing ferrule helps protect cables at the conduit transition
- IP66 performance when used with CABFLX TriFlex liquidtight conduit
- Supplied as one fitting
Professional Installation Requirements
- Installation in an electrical wiring system should be carried out by a licensed electrician in accordance with applicable Australian wiring requirements and the manufacturer's installation instructions.
Applications
- Termination of 100 mm liquidtight flexible metallic conduit
- Cable protection at enclosure, machinery and equipment entries
- Industrial electrical installations
- Outdoor and wet-area cable management where IP66 system protection is required
- Commercial and infrastructure cable routing with large-diameter conduit
Standards & Compliance
- AS/NZS 2053.1:2001 - General requirements for conduits and fittings for electrical installations
- AS/NZS 2053.8:1995 - Flexible conduits and fittings of metal or composite material
- AS/NZS 61386.23:2015 - Flexible conduit systems; verify project-specific certification and transition requirements
Environmental Benefits
- Zinc alloy and steel components can be recovered for metal recycling at end of service life
- Durable metallic construction can reduce replacement frequency and material waste
- Liquidtight sealing helps protect enclosed cables and extend the service life of the wider wiring installation
Warranty Information
Subject to CABAC's published terms of supply and applicable Australian Consumer Law guarantees. No fixed product-specific warranty period was identified.
Available Now
Available through CABAC and authorised Australian electrical distributors, subject to distributor stock and procurement lead times.
