SCHNAP Logo

Travertine Lamp: Matching Size, Fitting and Switch to the Job

12/10/2026
by Denny Setiawan
Polano 555mm E27 table lamp in beige travertine and ivory

A designer's spec sheet says "beige travertine table lamp" for the lounge, but the lamp on the bench measures 250mm and the console table needs something closer to 600mm. Stone-base lamps come in more sizes, fittings and switch types than the photo suggests, and a wrong pick means a return trip. Here is what to check on a travertine lamp, and on a marble table lamp, before the order goes in.

Start With the Space the Lamp Has to Fill

Size is the first thing that goes wrong on a stone-base lamp job. The same travertine look is listed across a wide range of sizes: the Polano comes in 405mm and 555mm, and the Sagitta runs from 250mm up to 630mm, like the Sagitta 630mm rectangular lamp. Measure the surface first, then confirm on the product page what the listed measurement refers to.

Weight is the next question. Stone bases are typically heavier than metal or resin bases, so check that the surface can carry the lamp, and allow for freight if you are ordering several for one project. A stable base also matters in rooms where the lamp could be knocked.

Related reading: Ordering lamps for a fit-out or a multi-room job? See bulk and project quotes at SCHNAP.

Travertine or Marble: What Changes in the Range

Both finishes sit in the same decorative lamps range, and the choice is mostly about look. Travertine usually reads warm and beige, with natural banding and pitting. A marble table lamp typically shows more distinct veining and often comes in darker tones. Check the product page to confirm whether a base is natural stone or a stone-effect finish, because the listing names describe the look.

Natural stone can vary from piece to piece, so two bases ordered at different times may not match exactly. If a room needs a pair, order them together.

Range Finish Fitting in listing Switch in listing
Polano (405mm, 555mm) Beige travertine, ivory E27 Not stated
Vybor Beige travertine, ivory E27 Inline switch
Renara Beige travertine, gold; or green marble, black E27 Inline switch
Deana Travertine, opal E27 Inline switch
Kolisa Travertino beige LED 6W, 2700K Inline switch
Sagitta (250mm to 630mm) Travertine, cream ES Not stated
Sisby Black marble, antique brass LED 12W Not stated
Mapel Black marble, antique brass LED 6W, 3000K Not stated
Arriba (220mm) Black marble, adjustable drum ES Not stated

Where the listing says "not stated", check the product page for the switch type before you order.

E27, ES or Integrated LED: Check the Fitting First

Most of the range is listed with an E27 or ES fitting, and a few lamps are integrated LED. E27 is the Edison screw cap, and ES is commonly used for the same Edison screw family, but confirm the cap size on the product page before you buy globes. If anyone on the job is unsure how to tell cap types apart, Schnap's guide to identifying B22 vs E27 bases covers the basics.

The integrated LED lamps, such as the Kolisa 6W 2700K LED lamp and the Sisby and Mapel marble lamps, don't take a separate globe. Check whether the LED source is replaceable before specifying one for a long-term fit-out. If it isn't, a failed LED can mean replacing the whole lamp.

Switch Type and Where the Lamp Will Sit

Switch position is easy to miss on a stone-base lamp. The Vybor inline-switch lamp, Renara, Deana and Kolisa are listed with an inline switch, which sits on the cord rather than on the base, so the lamp can be switched on without reaching behind a heavy base. For the others, check the product page to see where the switch is. If the same room also needs a matching dimmable floor lamp, check how each lamp is controlled before you order either, so the pair doesn't end up with different switching.

Power position matters just as much. A plug-in stone base needs an outlet within cord reach of the spot, and where there is none, a rechargeable table lamp may be a better answer than running a cord across the room.

Common Mistakes With Stone-Base Lamps

  • Ordering from the photo alone. Stone-base lamps look similar at thumbnail size, so a 250mm lamp can arrive when the job called for 600mm. The result is a return and a delay at handover. Check the listed measurement against the space before ordering.
  • Assuming any globe will fit. Lamps are listed as E27, ES or integrated LED, and a globe with the wrong cap simply won't screw in. The lamp sits without a light source on install day. Confirm the cap on the product page first.
  • Specifying integrated LED where a replaceable globe is expected. If the LED source isn't replaceable, a failure later means swapping the whole lamp. Check the product page before putting it in a spec.
  • Splitting a pair across orders. Natural stone can vary from piece to piece, so two bases ordered at different times may not match closely. Order the full set together.

Frequently Asked Questions

Choosing the Lamp

What size travertine table lamp suits a side table?

It depends on the table and the room. The listed sizes in this range run from 220mm to 630mm, so measure the surface first. The Polano 405mm lamp is a mid-size option, but confirm what the measurement refers to on the product page.

Is a travertine lamp the same as a marble table lamp?

No, they are different stones. Travertine typically looks warm with natural pitting and banding, while marble usually shows veining. Schnap lists both, so compare the finish on each product page.

Fitting and Compliance

What does ES mean on a table lamp?

ES stands for Edison screw, and in lighting listings it commonly means the E27 cap. Confirm the cap size on the product page before buying globes. The Arriba marble drum lamp is one example listed as ES.

Do I need a licensed electrician to fit a plug-in table lamp?

Plugging a lamp into a power point generally doesn't need a licensed electrician. Changing the plug, the cord or internal wiring, or any fixed wiring, should be done by a licensed electrician. Requirements can differ by state, so check with your local regulator.

Do plug-in table lamps need electrical approval in Australia?

Plug-in lamps are generally treated as in-scope electrical equipment, which means they are expected to carry the relevant safety approval and compliance marking. Check the product page, or ask Schnap for the approval details before specifying lamps for a commercial job.

Related reading: Running an LED lamp from a dimmer in the same room? Fixing LED dimmer flicker covers how to pick the right controller.

Shop travertine lamp at Schnap

The stone-base lamps below are grouped by finish and fitting. Trade pricing is available, with same-day dispatch from Kingsgrove NSW.

Travertine table lamps (E27 and ES)

Marble table lamps (E27 and ES)

Integrated LED stone-base lamps

Browse the full travertine lamp range at Schnap.