Firetracker Panasonic 8 conventional zone expansion board (8 zone line inputs)

In each control unit there can be, in total, up to six expansion boards of all types mounted.

Up to six 1580 boards can be used.

Each board has to be programmed (Win512) regarding:
- Address
- Address is set with jumpers on the board

This board has eight inputs for conventional zone lines.

In the last unit on each zone line an end-of-line resistor (4K7) has to be connected.

Each zone line input has to be programmed (Win512)
- Type of detectors (i.e. if a short circuit on the line shall generate a fault or a fire alarm)
- Zone number (plus address within the zone when required)
- User definable text message (when required)
- Alert annunciation, steady ON or ON/OFF via a time channel
- Disablement via a time channel
- Fire alarm delay
- Two unit (2-zone) dependent fire alarm (set in the Win512 System dialog box)