HDMI® over Ethernet Transmitter and Receiver Kit

Application
Watch High Definition pictures from your Pay TV / DVD / Blue Ray / Gaming Console on multiple screens across an IP network. This unit is ideally suited for transmitting from your BlueRay or Set Top Box to another location within a house. It has an IR return path that lets you control the source device from any remote location.

This unit converts the HDMI® into a packet style data stream and uses multicasting to transmit it over a network, this means you can use a 10/100/1000 standard switch to send one source to many receivers. It can also be used with a direct CAT5/6 cable linking the TX and RX units.

Features

• Sends HD video signals over a standard LAN infrastructure (Note: not recommended to be run over the data network)
• Full high definition 1080p compatible
• Runs uncompressed video and audio over a 1GB network switch
• IR remote control pass through to source
• Control your device from the other room
• Standard HDMI® input/output ports
• Watch your satellite receiver, DVD player, games console in another room of the house using LAN cables
• The product allows you to send High Definition signals from an HDMI® source to other locations around a house using standard network architecture and cables*
• The products converts a HDMI® signal into IP data to send across networks
• IR pass through allows you to control the source device from the second location
• Multiple receivers can be added to the system to create a one to many networks
• Requires a 10/100/1000 enabled switch for “one to many” applications
• 90m maximum length from switch to each device means you can reach large distances. Switches can be cascaded for even longer runs
• Small dimensions allow the TX and RX to be hidden

Kit Contents
1 x Transmitter
1 x Receiver
2 x Power supplies
1 x Instruction booklet
1 x IR Target
1 x IR Emitter

Please Note: A commercial version of this product is available refer to 27MM-HDIPC-RX and 27MM-HDIPC-TX

For Bulk Orders Ph:             02 9150 7744