12x DAB/DAB+ or FM In to IP or Analogue Out Receiver

Matchmaster has a full range of Headend equipment from entry level to complex systems, including engineering support and system designs
Matchmaster can offer simple Channel Filters with AGC through to complex DVB modules for any type of broadcast including Encoders, Modulators & Transmodulators for DVB-T, DVB-C, DVB-S/S2, IP, ASI, SDI, FM and many more
View More Headend Equipment
, 12 x DAB/DAB+ or FM inputs to IP or Analogue outputsFor operation in SMATV and Cable TV networksIP SPTS output in UDP/RTPWeb browser user interface with built in IP SwitchLine and headphone compatible audio monitor outputCan be used with Chameleon or Tangram to create DVBT output for radio insertion to TV systems
Input
12 separate 75 Ω F-connectors
FM Frequency 76-108 MHz
Signal level See figure 1
Sensitivity See figure 1
THD+N See figure 1
Selectivity adjacent channel typical 50 dB
Supported de-emphasis 50 µs
RDS support on request
DAB/DAB+ Frequency 168-240 MHz
Signal level See figure 1
Sensitivity See figure 1
Selectivity adjacent channel typical 46 dB
Output
IP 10/100/1000 Mbit RJ45 connector
UDP and RTP
Analog 3.5 mm phono jack (TRRS connector with left channel on tip right channel on ring 1. Ring 2 and sleeve connected to ground).
Accepted loads: 16 Ω-10 k Ω
Voltage: Adjustable nominal 0.95 VP-P*
Miscellaneous
Mounting 19" rack
Mechanical dimensions 483 x 44 x 166/184 mm **
Weight 205 kg
Operating temperature 0-40 °C
Operating humidity <95% non-condensing
Packaged dimensions 510 x 95 x 340 mm
Packaged weight 255 kg
Encoding
Audio coder MPEG-1 layer II stereo at 192 kbit/s
Audio sample rates 48 kHz
Packaged into an MPEG transport stream
Management
Web UI via the 10/100/1000 Mbit RJ45 connector
Software upgradeable via the web UI
Power Supply
Connector IEC-60320 C14
Voltage 85-264 VAC 50/60 Hz
Consumption < 15 W
Typical SINAD and BER vs Level (Figure 1)