SCHNAP Logo

Making Trade Life Easy!

Electrical

$270.80 $207.80
Matchmaster VAST Satellite Kit 80cm Dish & Ku Band LNB Assembly features Dish Diameter: 80cm, LNB Type: Ku-Band Single LNBF.
+

$348.60 $267.50
Matchmaster VAST satellite kit with 80cm dish, Ku-Band single LNBF and roof mount hardware. For regional TV reception.
+

$97.20 $75.60
Matchmaster tile roof mount secures satellite dishes to tile roofs. Foxtel approved for reliable residential and commercial installs.
+

$78.80 $60.50
Matchmaster 12ft galvanised steel mast, 1.25in diameter, suits tile, metal and colour-bond roof mounts. For antenna installations.
+

$57.40 $47.40
Galvanised steel 305mm mast wall fitting with U-bolt and nest. Heavy-duty for outdoor antenna and satellite mast mounting.
+

$33.70 $27.90
Matchmaster galvanised steel guy cleat anchors for antenna and mast guying on tin or timber. Pack of 4, suited to coastal environments.
+

$548.90 $421.10
Matchmaster Distribution Amplifier 31dB 47-862MHz with 31 dB, 47-862 MHz. Ideal for boosting weak TV signals in fringe reception areas.
+

$35.40 $28.50
Matchmaster 3kV CATV Isolator 5-1000MHz Compact Design features frequency Range: 5-1000MHz.
+

$240.30 $184.40
Matchmaster TV Antenna Coaxial Surge Protector 2GHz 75Ohm F Type.
+

$704.70 $540.70
Matchmaster 5-in 8-out multiswitch with built-in power supply, 47-862MHz terrestrial and 950-2400MHz satellite bands and up to 92dBuV output.
+

$958.90 $715.40
Matchmaster 5-in 16-out multiswitch with built-in PSU for remote DC feed, distributing 47-862MHz terrestrial and 950-2400MHz satellite signals.
+

$221.80 $170.20
Matchmaster CATV tap provides 15dB tap loss. Suited for MATV multi-outlet distribution.
+

$22.20 $18.40
Technical Specifications Current Rating: 10 Amps Switch Type: Four Gang Design: Slimline compact profile Suitable for indoor electrical...
+

$29.10 $24.60
MYW Isolator Switch 3 Pole 63A IP66 Rated Impact Resistant features current Carrying Capacity: 0 to 63A, voltage Rating: 250V, IP Rating: IP66.
+

$15.20 $12.80
Dexton 1 Gang switch cover plate features brushed stainless steel finish. Ideal for indoor switch upgrades and renovations.
+

$18.50 $15.70
Dexton 2 Gang switch cover plate features brushed stainless steel finish. Ideal for indoor switch upgrades and renovations.
+

$22.30 $18.90
Dexton 3 Gang switch cover plate features brushed stainless steel finish. Ideal for indoor switch upgrades and renovations.
+

$28.90 $24.50
Dexton 5 Gang switch cover plate features brushed stainless steel finish. Ideal for indoor switch upgrades and renovations.
+

$31.60 $26.80
Dexton 6 Gang switch cover plate features stainless steel finish. Ideal for indoor switch upgrades and renovations.
+

$20.70 $17.50
Single Power Point features 10A, white, stainless steel. Ideal for indoor residential and commercial installations.
+

$42.10 $22.20
GTS Double Power Point features 10A, black, stainless steel. Ideal for indoor residential and commercial installations.
+

$64.10 $56.30
A Single Phase Kilowatt Hour Meter with 45A capacity and 240V rating for accurate energy consumption measurement. It features 50/60Hz frequency, DIN rail mountable design, and digital total energy display. Suitable for residential energy monitoring, commercial energy usage tracking, and industrial single-phase power measurement, with AS/NZS 3000 – Wiring Rules (Electrical Installation) compliance. Review the full technical specifications and installation requirements below before fitting.
+

$15.50 $12.90
The Weatherproof Single Power Point 10A 250V IP53 is suited to outdoor residential and commercial power outlet applications. It features a 10A current rating, 250V voltage rating, grey finish, and IP53 weatherproof rating. The unit complies with AS/NZS 3112 - Plugs and Socket-Outlets (Type I Plug) and requires installation by a licensed electrician. See the product details below for specifications and installation requirements.
+

$4.10 $2.50
The Nickel Plated Brass Cable Gland 12mm provides secure cable entry for industrial and commercial use. Made from nickel plated brass, it is corrosion resistant and has a 12mm cable entry size. The gland measures 20mm x 30mm x 20mm and weighs 0.05kg, with applications including electrical installations, industrial and commercial wiring systems, and outdoor and indoor cable management. Review the technical specifications and installation requirements below before ordering.
+

Minimum quantity for "Nickel Plated Brass Cable Gland 12mm Corrosion Resistant LANX" is 1.


$17.40 $11.60
The Nickel Plated Brass Cable Gland 32mm provides secure cable entry for electrical installations and industrial and commercial wiring systems. Made from nickel plated brass with a corrosion resistant finish, it is suitable for indoor and outdoor use. The gland measures 40mm x 50mm x 40mm and weighs 0.1kg, with AS/NZS 3000 compliance shown on the page. Review the cable compatibility and installation requirements below before ordering.
+

Minimum quantity for "Nickel Plated Brass Cable Gland 32mm Corrosion Resistant LANX" is 1.


$35.40 $15.00
The Nickel Plated Brass Cable Gland 40mm provides secure cable entry for industrial and commercial wiring systems. Made from nickel plated brass with a corrosion resistant finish, it is suitable for 40mm cable entry. The gland measures 40mm x 40mm x 40mm and weighs 0.2kg, with AS/NZS 3000 compliance shown on the page. Review the cable compatibility and installation requirements below before ordering.
+

Minimum quantity for "Nickel Plated Brass Cable Gland 40mm Corrosion Resistant LANX" is 1.


$84.50 $56.30
The Nickel Plated Brass Cable Gland 63mm provides secure cable entry for industrial and commercial cable installations. Made from nickel plated brass, it is corrosion resistant and suitable for large cable diameters. The gland measures 63mm x 63mm x 63mm and weighs 0.2kg, with AS/NZS 3000 compliance shown on the page. Review the cable compatibility and installation requirements below before ordering.
+

Minimum quantity for "Nickel Plated Brass Cable Gland 63mm Corrosion Resistant LANX" is 1.


$735.20 $563.80
12Vdc remote alarm indicator features IP54 weatherproof housing, visual strobe and audible buzzer with mute. For industrial control panel signalling.
+

$1,146.40 $947.20
1 EACH ($947.20 per EACH)
Matelec tank fill controller features IP54 weatherproof enclosure, 24Vac control and includes a float switch and solenoid valve for tank level management.
+

$58.50 $48.30
1 EA ($48.30 per EA)
This 4-outlet powerboard features individually switched outlets with 525J surge protection for residential and commercial applications. Rated at 10A 2400W with RJ11/RJ45 LAN protection, a 1 metre cable, and overload protection with a reset button. Complies with AS/NZS 3112 and AS/NZS 3000 requirements shown on the product page. See the specifications below for dimensions, installation requirements, and application details.
+

$14.10 $11.60
1 EA ($11.60 per EA)
This Cabac 6-outlet powerboard provides reliable overload protection with a resettable circuit breaker for everyday residential and office use. It features a 10A rating, a 1 metre cord, and compact dimensions of 40mm x 70mm x 300mm. Complies with AS/NZS 3112 and AS/NZS 3000 for safe electrical installation requirements. See the complete specifications and application details below before ordering.
+

$125.60 $96.40
This Cabac industrial duty extension lead pairs a 10A rated see-through plug and socket with 15A rated cable across a 35m length. A unique LED indicator in the socket shows when the cord is live, and Australian standard insulated pins add safety on site. It weighs 5kg and is built for industrial sites, construction sites and outdoor setups needing durable power extension. Full technical specifications and installation notes are listed below.
+

$3.50 $2.00
Technical Specifications Material: Metal Compatible with Slimline series Purpose: Support for plaster renders Dimensions (H x L x W): 100mm x...
+

$152.10 $125.70
1 EACH ($125.70 per EACH)
PIR occupancy motion sensor features 220 240 V AC, Up to 22 metres at 3m height, IP44 Surface Mounted.
+

$20.10 $15.40
1 EA ($15.40 per EA)
Technical Specifications Current Rating: 10A Type: One Gang Switch Design: Standard Suitable for indoor use Dimensions (H x L x W): 86mm x...
+

-