Trade Discount 20%
Ethernet Cable RJ45 4P Straight Shielded 5m SICK
Built for industrial Ethernet and PROFINET communication, this SICK RJ45 4P cable has push-pull male connectors on both ends for a secure, reliable connection. The 5m shielded CAT5e cable is IP20 rated with a halogen-free PUR jacket and operates from -40°C to +85°C at the head depending on installation position. It's flame retardant to UL 1581 and IEC 60332-1-2 and compliant with AS/NZS 3000 wiring rules. Wiring diagrams and compliance documentation are covered further down the page.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Technical Specifications
- Connection type head A: Male connector, RJ45, 4-pin, straight
- Connection type head B: Male connector, RJ45, 4-pin, straight
- Connector material: TPU
- Connector color: Black
- Cable length: 5 m
- Cable type: 4-wire, PUR, halogen-free
- Jacket material: PUR, halogen-free
- Jacket color: Green
- Cable diameter: 6.7 mm
- Conductor cross section: 0.34 mm²
- Shielding: Shielded
- Bending radius: Flexible use > 12 x cable diameter, Stationary position > 5 x cable diameter, Drag chain operation > 12 x cable diameter
- Bending cycles: ≤ 3,000,000
- Reference voltage: 60 V DC
- Rated impulse voltage: 1 kV
- Current loading: ≤ 1.5 A
- Traversing speed: 3.3 m/s
- Travelling distance: 5 m
- Acceleration: ≤ 2 m/s²
- Signal type: Ethernet, PROFINET
- Transmission characteristics: CAT5e
- Data transmission rate: ≤ 0.1 Gbit/s
- Enclosure rating: IP20
- Operating temperature: Flexible use –30 °C to +70 °C, Stationary position –40 °C to +80 °C, Drag chain operation –30 °C to +70 °C, Head –25 °C to +85 °C
- Contamination rating: 3
- Overvoltage category: III
- Thermal resistance: Flame retardant according to UL 1581 Section 1060 (FT1), Section 1061 (cable flame), Section 1080 (VW-1) / IEC 60332-1-2
- Dimensions (H x L x W): 6.7mm x 5000mm x 6.7mm
- Weight: 0.1 kg
Key Features
- Male RJ45 4-pin straight connectors on both ends
- Push-pull male connector for secure connection
- Shielded CAT5e cable for reliable data transmission
- Halogen-free PUR jacket and cable material
- Flame retardant according to UL 1581 and IEC 60332-1-2
- High bending radius suitable for flexible and drag chain use
- Operating temperature range from -40°C to +85°C depending on use
Professional Installation Requirements
- Installation by a qualified technician or electrician is recommended to ensure proper connection and compliance with safety standards.
Applications
- Industrial Ethernet and PROFINET communication
- Zones with oils and lubricants
- Drag chain operation environments
Standards & Compliance
- AS/NZS 3000 – Wiring Rules (Electrical Installation)
Environmental Benefits
- Halogen-free cable and jacket materials reduce toxic emissions in case of fire
- Flame retardant properties enhance safety and reduce fire hazards
Warranty Information
Standard manufacturer warranty applies. Please refer to SICK's official warranty policy.
Available Now
The SICK YMRJA4-050PN1MRJA4 Ethernet PROFINET cable is available for immediate purchase, ideal for industrial communication and automation applications.
FAQ
Q: What type of connectors does this cable use?
A: Both ends have male RJ45, 4-pin, straight connectors with a push-pull design for secure connection.
Q: Is this cable suitable for drag chain applications?
A: Yes, it's rated for drag chain operation with a bending radius greater than 12 x cable diameter, and it's backed by SCHNAP's 30-day returns policy for added purchasing confidence.
For M12-terminated runs on the same network, the M12 4P straight to angled shielded ethernet cable offers a similar PROFINET-rated build.
A shielded M12 5P CAN cable is also available for CAN bus wiring on adjacent equipment.
Where higher data rates are needed, an M12 push-pull CAT6a industrial ethernet cable steps up to Cat6a performance.Available now from SCHNAP — trusted by Australian electricians and electrical contractors.
