Trade Discount 20%
Industrial Ethernet Cable Straight M12 to RJ45 Cat6A 2m SICK
This SICK Cat6A industrial ethernet cable pairs a screw-locking M12 8-pin X-coded connector with a snap-in RJ45 plug over a 2m length, suited to short, direct runs in zones with oils and lubricants. It's built with a halogen-free PUR jacket and shielded conductors supporting data rates up to 10 Gbit/s. The cable is rated IP65/IP67 at the M12 connector and complies with AS/NZS 60950. Spec sheet and application notes are available in the section below.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Technical Specifications
- Connection type head A: Male connector, M12, 8-pin, straight, X-coded
- Connection type head B: Male connector, RJ45, 8-pin, straight
- Locking plug connector: Screw-on connection (M12), snap-in locking (RJ45)
- Connector material: TPU
- Locking nut material: Zinc die-cast, nickel-plated
- Tightening torque: 0.6 Nm
- Cable length: 2 m
- Cable type: 8-wire, PUR, halogen-free
- Cable diameter: 6.4 mm
- Conductor cross section: 0.14 mm²
- Shielding: Shielded
- Bending radius flexible use: > 10 x cable diameter
- Bending radius stationary position: > 8 x cable diameter
- Nominal voltage: 125 V AC
- Test voltage: 1,000 V AC
- Reference voltage: 60 V DC
- Rated impulse voltage: 1 kV
- Current loading: 0.5 A
- Signal type: Ethernet, Gigabit Ethernet
- Transmission characteristics: CAT6A
- Data transmission rate: ≤ 10 Gbit/s
- Enclosure rating: IP65/IP67 (M12), IP20 (RJ45)
- Operating temperature: Stationary -40 °C to +80 °C, Head -25 °C to +85 °C
- Contamination rating: 3
- Insulation resistance: > 100 mΩ
- Overvoltage category: III
- Thermal resistance: Flame retardant acc. to UL 1581 and IEC 60332-1-2
- Dimensions (H x L x W): 10mm x 2000mm x 13mm
- Weight: 0.1 kg
Key Features
- Male connector M12, 8-pin, straight, X-coded
- Male connector RJ45, 8-pin, straight
- Screw-on connection (M12) and snap-in locking (RJ45)
- Cable is 2 m long, 8-wire, PUR, halogen-free
- Shielded cable with CAT6A transmission characteristics
- Data transmission rate up to 10 Gbit/s
- Enclosure rating IP65/IP67 (M12), IP20 (RJ45)
- Operating temperature range -40 °C to +80 °C (stationary), -25 °C to +85 °C (head)
- Flame retardant cable according to UL 1581 and IEC 60332-1-2
Professional Installation Requirements
- Installation by qualified personnel is recommended to ensure proper connection and compliance with safety standards.
Applications
- Industrial Ethernet communication
- Zones with oils and lubricants
- Data transmission in harsh environments
Standards & Compliance
- AS/NZS 60950 – Safety of IT and Communication Equipment
Environmental Benefits
- Halogen-free PUR jacket reduces environmental impact during disposal
- Durable and flame retardant materials enhance product lifespan and safety
Warranty Information
Standard manufacturer warranty applies. Please refer to SICK for detailed warranty terms.
Available Now
The SICK YM2X18-020EG1MRJA8 Ethernet Cable is available for immediate purchase, ideal for industrial Ethernet communication in harsh environments.
FAQ
Q: What connector configuration does this SICK M12 to RJ45 cable have?
A: It has a straight M12 8-pin X-coded connector on one end and a straight RJ45 8-pin connector on the other, both shielded.
Q: What ingress protection rating does this cable have?
A: It's rated IP65/IP67 at the M12 connector and IP20 at the RJ45 connector, suited to zones with oils and lubricants.
For a Cat6a build with two RJ45 ends instead, an RJ45 to RJ45 Cat6a cable is a related option.
Where two M12 connectors are needed instead of RJ45, an M12 to M12 Cat6a extension cable fits that setup.
For a Cat6 rated M12 X-Code option instead, the M12 X-Code Cat6 30m straight cable offers a related connector standard.
Available now from SCHNAP — trusted by Australian electricians and electrical contractors.
