Jonsa

Shop JONSA Electrical Products by Category

Satellite dishes and LNBs

The listed fixed offset dishes include the SDJ6502C1 65cm satellite dish, specified with a 65cm horizontal aperture, 72.62cm vertical axis, a 24.62-degree offset angle and galvanised-steel construction with a polyester powder-coated finish. The SDJ8501C4 85cm satellite dish is listed as a pack of four. Dish size and mount arrangement should be chosen for the site and service requirements rather than by diameter alone. For receiver-side components, the LNBPQU-LC quad LNB is listed with a 10.7GHz local-oscillator frequency and Foxtel IQ compatibility. Its product page also specifies weatherproof PCT compression connectors. Confirm the required receiver configuration and connector requirements against the product details before ordering.

Multiswitches for multi-room and multi-dwelling distribution

The DS/SMK55123FA 5-wire, 12-output multiswitch is described on its SCHNAP product page as distributing Foxtel satellite signals and being suited to multi-dwelling and multi-room installations. Confirm the required input layout, output count and system wiring against the actual installation design before specifying the multiswitch.

RF splitters, taps and satellite adaptors

For branching an RF signal, the DS/VTS525 2-way F-type splitter is listed for 5-2200MHz with all-port power pass. The APFF/FF3 F-to-F barrel connector is listed as a 3GHz satellite adaptor. When selecting distribution components, compare the required frequency range, output count, power-pass arrangement and connector interface; similar-looking parts are not automatically interchangeable.

TV and splitband amplification

The DS/SBV125NF splitband amplifier is listed for active amplification across a 5-2400MHz frequency range. Check its role in the signal path and the system-level levels and interfaces before selection. For general background on signal amplification, SCHNAP also publishes a guide to choosing a TV booster.

Fibre-optic transmitters and amplification

The DF/TXDG12 rack-mount fibre-optic transmitter is described with dual SC/APC outputs and a 47-2400MHz range for CATV headend use. For a different optical distribution role, the DF/17EFSA1/8 EDFA amplifier is listed with one input and eight outputs at 17dBm, SC/APC interfaces and a 19-inch, 1RU rack-mount format. The DS/SOTx1310607NF optical transmitter is separately listed with a 1310nm optical wavelength, 6dBm laser output and a 47-2200MHz frequency range. Treat these as model-specific specifications and confirm optical interface, input range, output power and downstream compatibility in the manufacturer's documentation.

Fibre splitters and power accessories

The DF/S12 PLC cassette fibre splitter is listed with one input, two outputs and SC/APC connections. The ABEP12V2A 12V DC power adaptor is listed with a 2A output and 5.5mm DC plug; its product description identifies the Mini Fibre Transmitter DF TXDGW4 as an intended use. Check the required voltage, current, plug and device compatibility before using a power adaptor with any equipment.

JONSA Products for Australian Electrical Projects

The current SCHNAP selection supports several distinct signal-distribution contexts. A single-dwelling satellite installation may require a dish and a service-compatible LNB; a multi-room or multi-dwelling Foxtel distribution design may call for a multiswitch with the appropriate input and output configuration. Fibre-based TV distribution may involve optical transmitters, EDFA amplification and PLC splitters. These examples describe product roles, not a guaranteed compatible system. Before ordering for a project, verify the service and frequency range, required signal levels, optical wavelength and power where relevant, connector type, output count, power-supply requirements, mounting arrangement and downstream device compatibility. Where a specification or relationship is unclear, confirm it against the exact product documentation rather than inferring compatibility from the JONSA name alone.

Buy JONSA Electrical Products from SCHNAP

SCHNAP lists JONSA satellite reception, RF distribution and fibre-optic components for online ordering with Australia-wide delivery. Use the exact product name and SCHNAP SKU when requesting assistance or a project quote. For example, identify the relevant code such as LNBPQU-LC, DS/SMK55123FA, DS/VTS525 or DF/TXDG12 rather than relying on a broad product description alone. For help with product identification, availability or a project requirement, contact service@schnap.com.au. Include the part code, required quantity and application details where available.

JONSA Trade Pricing for Licensed Electricians

SCHNAP keeps protected licensed-electrician trade pricing separate from public website pricing. Public prices should not be treated as the protected trade price available to approved trade customers. Eligible licensed electricians can apply through SCHNAP Trade Access. After the required licence details are verified and Trade Access is active, eligible protected pricing is available while logged in. Product-level eligibility and pricing should be checked on the relevant product page. For bulk quantities or project requirements, email service@schnap.com.au with the JONSA product code or description, quantities and relevant project details to request a quote.

Frequently Asked Questions

What JONSA products are listed by SCHNAP?

The current listed selection includes fixed satellite dishes, an LNB, a multiswitch, RF splitters and amplification, satellite adaptors, fibre-optic transmitters, an EDFA amplifier, a PLC cassette splitter and a DC power adaptor. Use the live SCHNAP product pages to confirm current availability.

What should I check before choosing a JONSA satellite dish or LNB?

Check the satellite service, required dish aperture and installation arrangement. For an LNB, verify local-oscillator frequency, output configuration, receiver requirements and connector compatibility. The LNBPQU-LC listing specifies a 10.7GHz local-oscillator frequency and Foxtel IQ compatibility; confirm the intended receiver setup against the full product details.

How do the listed splitter and multiswitch differ?

SCHNAP lists the DS/VTS525 as a 2-way F-type splitter covering 5-2200MHz with all-port power pass. The DS/SMK55123FA is listed as a 5-wire, 12-output multiswitch for Foxtel satellite distribution. Choose according to the system design, input arrangement and required outputs; do not substitute one type for the other without checking the wiring design.

Are all JONSA products compliant with the same standards?

Compliance and suitability should be confirmed for the specific product and installation. Check the relevant SCHNAP product page and applicable manufacturer documentation and Australian/New Zealand requirements. A statement about one model should not be extended to the whole brand.

How do I access trade pricing or request a JONSA project quote?

Eligible licensed electricians can apply through SCHNAP Trade Access. Protected pricing is available on eligible products after the required licence verification and account activation; public pricing is separate. For bulk quantities or project requirements, email service@schnap.com.au with the JONSA model or SCHNAP SKU, quantities and relevant project details.