Trade Discount 20%
Microwave Presence Detector DALI 8m Surface Mount CP Electronics
This DALI microwave presence detector from CP Electronics offers surface mounted installation with 360° horizontal detection, reaching up to 8m sideways and frontally, or 16m diameter on the floor. It's IP40 rated with a self-contained unit and easy installation via back plate, supporting up to 20 DALI or DSI drivers or ballasts. Programmable via UHS5 or UNLCDHS handsets, it combines lux level sensing, absence detection, and daylight harvesting for commercial and office lighting control. Full technical specifications and installation notes are listed below.
Please sign in so that we can notify you about a reply
Sign in
Please login to continue to your account.
Technical Specifications
- Detection technology: High frequency microwave
- Mounting method: Surface mounted
- Degree of protection: IP40
- Voltage: 230 V AC, 50 Hz
- Max switching power: 2300 W
- Detection angle: 360° horizontal
- Max reach: 8 m sideways and frontally, 16 m diameter on floor
- Response value luminosity adjustable: 0-2000 lx
- Standby consumption: approx. 3.1 mA
- Operating temperature range: -10 to 50 °C
- Material: Thermoplastic, halogen free
- Colour: White (RAL 9002)
- Switch-on delay: 1 second
- Switch-off delay: 10 seconds
- Max duty cycle: 99 minutes
- Mandatory neutral connection required
- Dimensions (H x L x W): 95mm x 52mm x 95mm
- Weight: 0.15 kg
Key Features
- Surface mounted design with IP40 rating
- Microwave presence/absence detection technology
- Controls up to 20 drivers/ballasts
- Programmable via UHS5 or UNLCDHS handsets
- Supports switching and dimming with lux level lensing
- Absence detection and maintained illuminance (daylight linking/harvesting)
- Two channel flexibility with scene setting and recall
- Compatible with all lighting types
- Self-contained unit with easy installation via back plate
- Infrared remote handset available for override
Professional Installation Requirements
- Installation should be performed by a qualified electrician to ensure compliance with electrical standards and optimal device performance.
Applications
- Automatic control of lighting in commercial and office buildings
- Heating and ventilation control based on presence detection
- Energy saving through presence and absence detection in indoor environments
- Suitable for use with DALI and DSI digital dimming ballasts
Standards & Compliance
- AS/NZS 3000 – Wiring Rules (Electrical Installation)
Environmental Benefits
- Reduces energy consumption by automatically controlling lighting and HVAC based on occupancy
- Supports daylight harvesting to minimize artificial lighting use
- Helps lower carbon footprint through efficient energy management
Warranty Information
Standard manufacturer warranty applies; typically 2 years against defects.
Available Now
The CP Electronics DALI/DSI Digital Dimming IP40 Ceiling Surface Mounted Microwave Presence/Absence Detector is available for immediate purchase, ideal for commercial and office lighting control applications.
FAQ
Q: What is the maximum number of drivers supported by this detector?
A: It supports DALI and DSI digital dimming control for up to 20 drivers or ballasts.
Q: Where is this surface-mount detector intended to be used?
A: It is suitable for commercial and office buildings, providing automatic lighting control and presence detection for indoor environments.
Pair this detector with a DALI single channel interface for compatible DALI lighting control installations.
Install a C-Bus dimmer controller 4-channel DIN rail unit to manage multiple lighting circuits from a central location.
A BACnet hotel room controller can be integrated into commercial building automation systems alongside intelligent lighting controls.
Improve dimming performance by following this LED dimmer flicker guide before commissioning your lighting control system.
Available now from SCHNAP — trusted by Australian electricians and electrical contractors.
