Product Features
Enclosure:
IP54 weatherproof rating
Polycarbonate
Mounting brackets included
Protection:
Low voltage control and input circuitry
Control & interface:
Indicator lights for power on and pump run
Inputs:
Single phase (230Vac) power supply
2x 15Vdc inputs for start and stop level float switches
Outputs:
Power supply to pump (6 Amps max)
Included with panel:
10 Amp 3 pin 1.5m power supply lead
2x 9006 float switches with 2.5m cable
Function Features
When the pump start input closes, the controller will activate the indicator light and the pump, pumping grey water out of the tank to selected outlets, until the pump stop input opens
If the pump has not run for 24 hours and the stop input is closed, the controller will activate the pump to pump out residual in the tank
If the pump runs continuously for 5 minutes, the controller will shut it off for 30 minutes (timeout period can be adjusted)
Enclosure:
IP54 weatherproof rating
Polycarbonate
Mounting brackets included
Protection:
Low voltage control and input circuitry
Control & interface:
Indicator lights for power on and pump run
Inputs:
Single phase (230Vac) power supply
2x 15Vdc inputs for start and stop level float switches
Outputs:
Power supply to pump (6 Amps max)
Included with panel:
10 Amp 3 pin 1.5m power supply lead
2x 9006 float switches with 2.5m cable
Function Features
When the pump start input closes, the controller will activate the indicator light and the pump, pumping grey water out of the tank to selected outlets, until the pump stop input opens
If the pump has not run for 24 hours and the stop input is closed, the controller will activate the pump to pump out residual in the tank
If the pump runs continuously for 5 minutes, the controller will shut it off for 30 minutes (timeout period can be adjusted)
Order this product by phone
We ship Australia wide 
Quality Products
30 days free return